Metra AX-ADXSVI-MB1 Leaflet

© COPYRIGHT 2004-2013  METRA ELECTRONICS CORPORATION

 

REV. 12/18/13

© COPYRIGHT 2004-2013  METRA ELECTRONICS CORPORATION

 

REV. 12/18/13

© COPYRIGHT 2004-2013  METRA ELECTRONICS CORPORATION

 

REV. 12/18/13

© COPYRIGHT 2004-2013  METRA ELECTRONICS CORPORATION

 

REV. 12/18/13

•  Provides accessory (12 volt 10 amp)

•  Retains R.A.P. (retained accessory power)

•  Used in non-amplified systems, or when replacing amplified system

•  Provides NAV outputs (parking brake, reverse, and V.S.S.)

•  Prewired ASWC-1 harness included (ASWC-1 sold separately)

•  High level speaker input

•  USB updatable

Note: This harness must be used in conjunction with the AX-ADXSVI

•  Connect the

Yellow wire to the radio’s 12 volt battery or memory wire.

•  Connect the

Black wire to the radio’s ground wire.

•  Connect the

Red wire to the ignition wire of the aftermarket radio.

•  Connect the

Orange wire to the illumination wire of the aftermarket radio. If the

aftermarket radio has no illumination wire, tape off the

Orange wire.

•  Connect the

Blue wire to the antenna turn on wire of the aftermarket radio.

•  Connect the

White wire to the left front positive speaker output of the

aftermarket radio.

•  Connect the

White/Black wire to the left front negative speaker output of the

aftermarket radio.

•  Connect the

Yellow wire to the radio’s 12 volt battery or memory wire.

•  Connect the

Black wire to the radio’s ground wire.

•  Connect the

Red wire to the ignition wire of the aftermarket radio.

•  Connect the

Orange wire to the illumination wire of the aftermarket radio. If the

aftermarket radio has no illumination wire, tape off the

Orange wire.

•  Connect the

Blue wire to the antenna turn on wire of the aftermarket radio.

•  Connect the

White wire to the left front positive speaker output of the

aftermarket radio.

•  Connect the

White/Black wire to the left front negative speaker output of the

aftermarket radio.

•  Connect the

Yellow wire to the radio’s 12 volt battery or memory wire.

•  Connect the

Black wire to the radio’s ground wire.

•  Connect the

Red wire to the ignition wire of the aftermarket radio.

•  Connect the

Orange wire to the illumination wire of the aftermarket radio. If the

aftermarket radio has no illumination wire, tape off the

Orange wire.

•  Connect the

Blue wire to the antenna turn on wire of the aftermarket radio.

•  Connect the

White wire to the left front positive speaker output of the

aftermarket radio.

•  Connect the

White/Black wire to the left front negative speaker output of the

aftermarket radio.

•  Connect the

Yellow wire to the radio’s 12 volt battery or memory wire.

•  Connect the

Black wire to the radio’s ground wire.

•  Connect the

Red wire to the ignition wire of the aftermarket radio.

•  Connect the

Orange wire to the illumination wire of the aftermarket radio. If the

aftermarket radio has no illumination wire, tape off the

Orange wire.

•  Connect the

Blue wire to the antenna turn on wire of the aftermarket radio.

•  Connect the

White wire to the left front positive speaker output of the

aftermarket radio.

•  Connect the

White/Black wire to the left front negative speaker output of the

aftermarket radio.

•  Provides accessory (12 volt 10 amp)

•  Retains R.A.P. (retained accessory power)

•  Used in non-amplified systems, or when replacing amplified system

•  Provides NAV outputs (parking brake, reverse, and V.S.S.)

•  Prewired ASWC-1 harness included (ASWC-1 sold separately)

•  High level speaker input

•  USB updatable

Note: This harness must be used in conjunction with the AX-ADXSVI

•  Provides accessory (12 volt 10 amp)

•  Retains R.A.P. (retained accessory power)

•  Used in non-amplified systems, or when replacing amplified system

•  Provides NAV outputs (parking brake, reverse, and V.S.S.)

•  Prewired ASWC-1 harness included (ASWC-1 sold separately)

•  High level speaker input

•  USB updatable

Note: This harness must be used in conjunction with the AX-ADXSVI

C Class

2001-2004

CLK Class

2004

CLK500

2003

CLK55AMG

2003

•  Provides accessory (12 volt 10 amp)

•  Retains R.A.P. (retained accessory power)

•  Used in non-amplified systems, or when replacing amplified system

•  Provides NAV outputs (parking brake, reverse, and V.S.S.)

•  Prewired ASWC-1 harness included (ASWC-1 sold separately)

•  High level speaker input

•  USB updatable

Note: This harness must be used in conjunction with the AX-ADXSVI

C Class

2001-2004

CLK Class

2004

CLK500

2003

CLK55AMG

2003

C Class

2001-2004

CLK Class

2004

CLK500

2003

CLK55AMG

2003

C Class

2001-2004

CLK Class

2004

CLK500

2003

CLK55AMG

2003