Metra AX-ADXSVI-CH1 Leaflet
INSTAX-ADXSVI-CH1
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 12/12/13
INSTAX-ADXSVI-CH1
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 12/12/13
INSTAX-ADXSVI-CH1
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 12/12/13
INSTAX-ADXSVI-CH1
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932
metraonline.com
REV. 12/12/13
AX-ADXSVI-CH1
2004-2010 Chrysler accessory and NAV output CAN harness
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in non-amplified systems, or when replacing amplified system
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• USB updatable
Note: This harness must be used in conjunction with the AX-ADXSVI
CHRYSLER
300
2005-2007
Aspen
2007
PT Cruiser
2006-2010
DODGE
Caliber
2007-2008
Charger
2006-2007
Dakota
2005-2007
Durango
2004-2007
Magnum
2005-2007
Ram 1500
2006-2008
Ram 2500/3500
2006-2009
JEEP
Commander
2006-2007
Compass
2007-2008
Grand Cherokee
2005-2007
Patriot
2007-2008
MITSUBISHI
Raider
2006-2007
APPLICATIONS
WIRING THE AX-ADXSVI-CH1
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
Red wire to the ignition wire of the aftermarket radio.
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• Connect the
Blue wire to the antenna turn on wire of the aftermarket radio.
• Connect the
White wire to the left front positive speaker output of the aftermarket radio.
AX-ADXSVI-CH1
2004-2010 Chrysler accessory and NAV output CAN harness
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in non-amplified systems, or when replacing amplified system
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• USB updatable
Note: This harness must be used in conjunction with the AX-ADXSVI
CHRYSLER
300
2005-2007
Aspen
2007
PT Cruiser
2006-2010
DODGE
Caliber
2007-2008
Charger
2006-2007
Dakota
2005-2007
Durango
2004-2007
Magnum
2005-2007
Ram 1500
2006-2008
Ram 2500/3500
2006-2009
JEEP
Commander
2006-2007
Compass
2007-2008
Grand Cherokee
2005-2007
Patriot
2007-2008
MITSUBISHI
Raider
2006-2007
APPLICATIONS
WIRING THE AX-ADXSVI-CH1
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
Red wire to the ignition wire of the aftermarket radio.
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• Connect the
Blue wire to the antenna turn on wire of the aftermarket radio.
• Connect the
White wire to the left front positive speaker output of the aftermarket radio.
AX-ADXSVI-CH1
2004-2010 Chrysler accessory and NAV output CAN harness
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in non-amplified systems, or when replacing amplified system
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• USB updatable
Note: This harness must be used in conjunction with the AX-ADXSVI
AX-ADXSVI-CH1
2004-2010 Chrysler accessory and NAV output CAN harness
• Provides accessory (12 volt 10 amp)
• Retains R.A.P. (retained accessory power)
• Used in non-amplified systems, or when replacing amplified system
• Provides NAV outputs (parking brake, reverse, and V.S.S.)
• Prewired ASWC-1 harness included (ASWC-1 sold separately)
• High level speaker input
• USB updatable
Note: This harness must be used in conjunction with the AX-ADXSVI
CHRYSLER
300
2005-2007
Aspen
2007
PT Cruiser
2006-2010
DODGE
Caliber
2007-2008
Charger
2006-2007
Dakota
2005-2007
Durango
2004-2007
Magnum
2005-2007
Ram 1500
2006-2008
Ram 2500/3500
2006-2009
JEEP
Commander
2006-2007
Compass
2007-2008
Grand Cherokee
2005-2007
Patriot
2007-2008
MITSUBISHI
Raider
2006-2007
APPLICATIONS
CHRYSLER
300
2005-2007
Aspen
2007
PT Cruiser
2006-2010
DODGE
Caliber
2007-2008
Charger
2006-2007
Dakota
2005-2007
Durango
2004-2007
Magnum
2005-2007
Ram 1500
2006-2008
Ram 2500/3500
2006-2009
JEEP
Commander
2006-2007
Compass
2007-2008
Grand Cherokee
2005-2007
Patriot
2007-2008
MITSUBISHI
Raider
2006-2007
APPLICATIONS
WIRING THE AX-ADXSVI-CH1
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
Red wire to the ignition wire of the aftermarket radio.
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• Connect the
Blue wire to the antenna turn on wire of the aftermarket radio.
• Connect the
White wire to the left front positive speaker output of the aftermarket radio.
WIRING THE AX-ADXSVI-CH1
• Connect the
Yellow wire to the radio’s 12 volt battery or memory wire.
• Connect the
Black wire to the radio’s ground wire.
• Connect the
Red wire to the ignition wire of the aftermarket radio.
• Connect the
Orange wire to the illumination wire of the aftermarket radio. If the
aftermarket radio has no illumination wire, tape off the
Orange wire.
• Connect the
Blue wire to the antenna turn on wire of the aftermarket radio.
• Connect the
White wire to the left front positive speaker output of the aftermarket radio.