VisionTek 900762 Leaflet

Page of 1
VisionTek Wallet Drive
VisionTek Part Number 900762
Designed to deliver the perfect combination of style, portability, and performance, the VisionTek 
Wallet Drive transforms mundane data storage and backup into the world of stylish convenience. 
Sized like a wallet, its leather cover with a clever magnetic flap closure conceals a hot-swappable drive 
tray with an integrated USB 3.0/2.0 connecting cable. Just insert any SATA hard drive or solid state 
drive and connect the Wallet Drive to a PC or Mac® to experience data transfer speeds up to 600MB/s. 
And because it’s bus-powered, you’ll never be tied down to an AC power outlet.
Easy 3-Step Drive Installation
There’s nothing to assemble, no tools required... just supply a new or existing hard drive or SSD to 
start transferring, storing, sharing, and backing up documents, music, videos, photos, and other data.
1.  Open the Wallet Drive: Lift up on the magnetic flap and unwrap the integrated USB 3.0 
connecting cable (not pictured) from the side of the drive tray. 
2.  Insert the HDD or SSD: Support the enclosure by placing the bottom against the palm of your 
hand or flat on a hard surface. Match the connectors on the bottom of the HDD or SSD to be 
installed to the connectors in the enclosure drive tray. Then, slide the drive into 
the tray until the drive and tray connectors seat fully.
3.  Secure the HDD or SSD: Once the drive and tray connectors seat fully, gently 
push the drive down until it is secured in the drive tray sides. It should make an 
audible “click” noise when it is properly secured.
Key Features
•  Blazing fast data rates: With ability to use SATA 6Gb/s drives via the USB 3.0 
interface, you can enjoy data transfers up to 600MB/s. That’s up to 10x faster 
than USB 2.0!
•  Compatible with wide variety of drives: Accepts 2.5” 7mm and 9.5mm SATA 
I/II/III hard drives and solid state drives.
•  Tool-less and screw-less design: Nothing to assemble... just slide in drive for 
instant data access, transfer, and/or backup.
•  Plug and Play portability: No drivers to install... after inserting a drive, just 
connect the ultra-light 4.0 ounce enclosure with the built-in USB cable to your 
computer.
•  Bus-powered: No bulky AC adapter to carry around... the enclosure powers 
from the USB port.
•  Hot-Swap ready: No need to disconnect drive from computer... remove and 
replace drives in the enclosure as you desire.
•  Super quiet: Fanless ventilation for noise-free cooling.
Operating System Requirements
PC: 
•  Windows® XP*/Vista/Windows 7/Windows 8/Windows 8.1 
*Use of drives exceeding 2.0TB of capacity requires 64-bit version of Windows XP 
Mac: 
•  Mac OS X® 10.5 or above 
•  Use of drives exceeding 2.0TB of capacity is supported. 
Specifications
Chipset: ASMedia 1053E 
Drive Compatibility: 1 x 2.5” 7mm or 
9.5mm SATA I/II/III hard drive or SSD. 
Certain drives may only power via USB 3.0 
interface. 
Drive Interface: SATA (Serial ATA) 
Revision 3.0 
Bus Interface: 1 x USB 3.0/2.0 compatible 
port 
Maximum Data Transfer Rate: USB 3.0: 
600MB/s, USB 2.0: 60MB/s 
LED Indicator: Power: steady blue light, 
Drive activity: flashing blue light 
Size: 4.72” D x 3.14” W x .78” H (flat) 
Weight: 4.0 ounces with drive installed
Compliance: CE, FCC, RoHS 
Warranty: 12 months 
105 Prairie Lake Rd, East Dundee, IL 60118
www.visiontek.com