Philips PPX2340 PPX2340/F7 User Manual

If a problem occurs that cannot be corrected with the

instructions in this user manual (see also the help

below), follow the steps given here.

Switch the device off using the on/off switch on the

side.

Wait at least ten seconds.

Switch the device on using the on/off switch on the

side.

If the problem repeats, please contact our technical

customer service or your retailer.

 

The Pocket Projector cannot be switched on

• Connect your computer or a compatible power sup-

ply to recharge the internal battery. Make sure the 
Pocket Projector is switched off.

No sound from the external connected device

• Check the cables to the external device
• Set the volume on the external device
• Only the original cables from the device manufac-

turer may function

Only the initial screen appears and not the image from 

the external device

• Check if the cables are connected to the right con-

nectors.

• Please check that the external device is switched on
• Check if the video output of the external device is 

switched on.

Only the initial screen appears and not the image from 

the connected computer

• Check if the software at your computer has been 

started.

Device switches to stand-by mode

• When the device is running for a long period of time, 

the surface becomes hot and a warning symbol 
appears on the projection. The device switches auto-
matically to ECO mode when it gets too hot (see 
also chapter Power Save, page 18).

• When the battery does not have sufficient capacity, 

the device switches to stand-by mode. Connect the 
device to the power supply.

Devices changes from maximum level of brightness to 

minimum level of brightness when the device is connect-

ed over USB to play videos.

• When the environment temperature is too high, the 

devices turns automatically from maximum level of 
brightness to minimum level of brightness in order to 
protect the high power LED.

• Use the device with lower environment tempera-

tures.

Device can not connect with an Android device (for ex-

ample mobilephone/smartphone with Android operating 

system) when connected via USB.

• Deactivate the function “USB debugging“ in the set-

tings menu of your Android device before connect-
ing the Pocket Projector via USB; your Android 
device should be recognized as USB storage device.