SmartMetals 062.7650-85 Leaflet
Tip & Touch stand
PRODUCT LEAFLET
062.7650-85 Tip & Touch stand (motorized tip function) Height adjustment = 660-1320 mm 85 kg
This product has specifically been developed for touch screens which would be used in the table position; we call it the Tip
& Touch stand. This wheeled stand has electrical height adjustment from 660-1320 mm (table height). The Tip & Touch
stand is available with a tip function by gas spring or an electrical tip function. Furthermore the head of the stand contains a
fixed bracket with most VESA-patterns integrated. In the baseplate two sets of mounting holes are integrated. Here a
double base plate is used; mount the lifts in its second position (the back position looking at the front side of the base
plate). A display of max. 85 kg (max. 70 inch) can be attached. Please note: Check if your display/flat screen is suitable for
horizontal use
& Touch stand. This wheeled stand has electrical height adjustment from 660-1320 mm (table height). The Tip & Touch
stand is available with a tip function by gas spring or an electrical tip function. Furthermore the head of the stand contains a
fixed bracket with most VESA-patterns integrated. In the baseplate two sets of mounting holes are integrated. Here a
double base plate is used; mount the lifts in its second position (the back position looking at the front side of the base
plate). A display of max. 85 kg (max. 70 inch) can be attached. Please note: Check if your display/flat screen is suitable for
horizontal use
SmartMetals Mounting Solutions B.V. • Handelsweg 4 • 4231 EZ Meerkerk • The Netherlands • T +31(0) 183352942 • F +31(0) 183352909 • info@SmartMetals.eu
Tip & Touch stand
PRODUCT LEAFLET
062.7650-85 Tip & Touch stand (motorized tip function) Height adjustment = 660-1320 mm 85 kg
This product has specifically been developed for touch screens which would be used in the table position; we call it the Tip
& Touch stand. This wheeled stand has electrical height adjustment from 660-1320 mm (table height). The Tip & Touch
stand is available with a tip function by gas spring or an electrical tip function. Furthermore the head of the stand contains a
fixed bracket with most VESA-patterns integrated. In the baseplate two sets of mounting holes are integrated. Here a
double base plate is used; mount the lifts in its second position (the back position looking at the front side of the base
plate). A display of max. 85 kg (max. 70 inch) can be attached. Please note: Check if your display/flat screen is suitable for
horizontal use
& Touch stand. This wheeled stand has electrical height adjustment from 660-1320 mm (table height). The Tip & Touch
stand is available with a tip function by gas spring or an electrical tip function. Furthermore the head of the stand contains a
fixed bracket with most VESA-patterns integrated. In the baseplate two sets of mounting holes are integrated. Here a
double base plate is used; mount the lifts in its second position (the back position looking at the front side of the base
plate). A display of max. 85 kg (max. 70 inch) can be attached. Please note: Check if your display/flat screen is suitable for
horizontal use
SmartMetals Mounting Solutions B.V. • Handelsweg 4 • 4231 EZ Meerkerk • The Netherlands • T +31(0) 183352942 • F +31(0) 183352909 • info@SmartMetals.eu