Petzl NAO E36AHR Data Sheet

clipped to the rear plate (to protect the 

USB connection). Gently rinse the case 

in fresh water, without immersing it. Do 

not put a needle into the holes. Let the 

lamp dry in the open air.

Do not put the lamp directly onto a heat 

source.

Unplug the cable from the battery case. 

Unclip the case from the rear plate, to 

ventilate the USB connector. Open the 

battery case and let the lamp dry in the 

open air. Do not put the lamp directly 

onto a heat source. Never dismantle 

the body of your lamp, as this voids the 

Petzl warranty. 

Clean the lamp with a soft cloth. If sand 

interferes with knob operation, hold it 

under water at low flow and pressure, 

while turning the knob several times. 

And let your lamp dry in the open air.

- How do I clean my lamp?

Clean the lamp with a soft, damp cloth. 

And let your lamp dry in the open air.

For all other questions, contact Petzl 

after-sales service.