Psiber Data Psiber Cable tester, cable tester 226501 User Manual

A. Plug the wire into the correct Test Port, Ethernet to RJ45

B. Plug the opposite end into the Main Remote

C. Press Network Button

D. The LCD Display reports wire condition, Pass/Fail

E. To turn off, press O/ID Button

A. With the unit turned OFF, hold down the TONE button until 

LCD illuminates

B. To select a tone cadence, press the TONE button repeatedly to step through 

the four cadence options: HI, LO, Hi-Lo1, and Hi-Lo1. Stop when you reach the 

option you want. The option you select determines the cadence sent from the 

main tester, through the cable, and picked up by the tone tracer probe.

C. Press the appropriate cable type button (voice, video, or data) to select a 

cable for the tone signal

* Note: Tone is detected by a tone tracer probe

Testing: CM400 shows Opens, Shorts, Miswires, Split Pairs, PASS and

FAIL results quickly.      

Toning: CM400’s built-in tone generator is a fl exible and function-packed

tone generator. Its confi gurable signal can be generated to fi nd and fi x the

position on any type of cable - either exposed or hidden, in ceilings or

behind walls.

Option: CM400 is supported by (1-19) wiremapping ID locators (Network/Coax).

Button Function

1. LCD Display

2. Voice Mode

3. Video Mode

4. Data Mode

5. Tone Mode

6. On/Off and ID Mode

7. Main Unit Remote 

(RJ11, RJ45)