Panduit UTP RJ45 TG-MiniJack kat 6 CJ688TGBL Leaflet
Product codes
CJ688TGBL
3933 US ROUTE 11, CORTLAND, NEW YORK 13045
Phone Number: 1-800-345-3851 Fax Number: 607-758-3648
This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility
and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance
with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report
with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report
and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service
must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself
must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself
does not imply that the material, product, or service is or has ever been under an Intertek certification program.
Report of Test
Rendered to:
Panduit Corporation
10500 W. 167
th
Street
Orland Park, IL 60467
The product described in this Report was tested and examined by Intertek for compliance to the standards listed
below. The products listed below are not part of an Intertek ETL SEMKO Verification Program. The results are
provided to the client as a one time performance test and shall not be utilized to imply compliance to the standard as
part of an on-going program.
below. The products listed below are not part of an Intertek ETL SEMKO Verification Program. The results are
provided to the client as a one time performance test and shall not be utilized to imply compliance to the standard as
part of an on-going program.
Reference Intertek Report No.: 3091293CRT-003
Dated: March 8, 2006
Model Number(s): CJ688TG Modular Jack
The tests, test methods, and results of tests, compiled in the referenced report are in compliance with the
following specification:
Standard: ASTM D4566-98, dated December 10, 1998, Standard Test Methods for Electrical Performance
Properties of Insulations and Jackets for Telecommunications Wire and Cable.
following specification:
Standard: ASTM D4566-98, dated December 10, 1998, Standard Test Methods for Electrical Performance
Properties of Insulations and Jackets for Telecommunications Wire and Cable.
ANSI/TIA/EIA-568-B.2-1 June 2002 Transmission Performance Specification for 4 Pair 100 Ω Category 6
Cabling
Conclusion:
The Category 6 Modular Jack, as previously described, was tested in accordance with the procedures contained
in ANSI/TIA/EIA-568-B.2-1 June 2002 Transmission Performance Specification for 4 Pair 100 Ω Category 6
Cabling, and was found to be in compliance with the indicated applicable electrical requirements for Category
in ANSI/TIA/EIA-568-B.2-1 June 2002 Transmission Performance Specification for 4 Pair 100 Ω Category 6
Cabling, and was found to be in compliance with the indicated applicable electrical requirements for Category
6. Testing was witnessed at Panduit Corporation in Orland Park, IL.
May 20, 2006
Approved By:
Stephen R. Comer
Laboratory Supervisor
Global Cabling Products Testing
Global Cabling Products Testing