Lappkabel 0021811, ÖLFLEX® ROBUST 200 Control Data Cable, 3 x 2.5 mm², Black Sheath 0021811 Data Sheet
Product codes
0021811
U.I. Lapp
GmbH
DATA SHEET
ÖLFLEX
®
ROBUST 200
valid from: 03.11.2009
Originator: H. Schillinger / PDC
approved: H. Pfeffer/ PDC
Document:
DB0021800EN
page 1 of 1
All deviations from this specification are subject to explicit consent of U.I. Lapp GmbH. All rights reserved acc. to DIN 34.
PD 0019/02_10.09EN
Application
ÖLFLEX
ROBUST 200 cables are connecting cables for flexible use and fixed installation for a robust mechanical use. They
are for use in dry, damp and wet rooms. Under following to the indicate temperature range is an use outside possible. At
room temperature they are increased resistant against acids, caustics solutions and certain oils, greases, waxes of vegeta-
ble, animal, mineral and/or synthetic basis. ÖLFLEX
room temperature they are increased resistant against acids, caustics solutions and certain oils, greases, waxes of vegeta-
ble, animal, mineral and/or synthetic basis. ÖLFLEX
ROBUST 200 cables are used as flexible connecting cable in machine
tool manufacture, plant engineering, in power stations, in heating and air conditioning installations, agriculture, food-, phar-
maceutical- and cosmetically industry, in composting- and sewage plants, by the production of textile fiber, of water based
purification plants by industrial and private use. Suitable for freely moved, not permanently recurrent movement without
forced guidance and tensile stress.
maceutical- and cosmetically industry, in composting- and sewage plants, by the production of textile fiber, of water based
purification plants by industrial and private use. Suitable for freely moved, not permanently recurrent movement without
forced guidance and tensile stress.
Technical data
Design
based on HD 22.10 S2 resp. VDE 0282-10
Conductor
bare copper, fine wire strand in accordance to IEC 60228 resp. VDE 0295, class 5
Core insulation
Special PP based compound
Identification
up to 5 cores coloured acc. to HD308 S2 resp. VDE 0293-308
more than 6 cores: Black cores with white numbers
with or without GN/YE ground conductor acc. to DIN EN 50334 resp. VDE 0293-334
Outer sheath
TPE compound, black
Nominal voltage
450 / 750 V
Test voltage
4000 V AC
Min. bending radius
occasional flexing: 10 x cable diameter
fixed installation: 4 x cable diameter
Temp. range
occasional flexing : -40 up to +80° C max. conductor temperature
fixed installation -50 up to +80° C max. conductor temperature
Tests
acc. to IEC 60811 resp. VDE 0473 and VDE 0472
EC directive
This cable is conform to ECD 2006/95/EC (Low Voltage Directive).