APC AP95100 Power supplier AP95100 User Manual

The selections available from the Mass Configuration view enable you perform mass configuration 
tasks on the NetBotz devices installed on your network. Use Mass Configuration tasks to set NetBotz 
device configuration settings, enable license-key based functionality to your devices, enable and 
disable alerts, set threshold values, configure device web interfaces, and to configure the alert actions 
and policies that will be used when alerts are reported by the sensors that are built into or connected 
to your devices. The individual tasks are divided into Sensor and Alert Settings and Device Settings. 
This chapter covers only the Sensor and Alert Settings tasks. For information regarding Device 
Settings tasks see “Mass Configuration: Device Settings” on page 159.

The tasks available from the Sensors and Alert Settings portion of the Mass Configuration panel 
enable you to configure the sensors that are built into or connected to your NetBotz devices and 
devices. Detailed information about the tasks available from the Sensors and Alert Settings portion of 
the Configuration panel follows.

If a device goes offline, InfraStruXure Central will assume that the offline state is a temporary event. 
When a device is in an offline state you can still perform Mass Configuration tasks on the device. 
InfraStruXure Central will store these tasks in the Management Device Job Control queue, and will 
automatically perform the tasks as soon as the device comes back online.