APC AP95100 Power supplier AP95100 User Manual

To configure devices to periodically generate and e-mail sensor reports to specified recipients:

1. Select a device group or container from the navigation pane, or select one or more devices from the 

device list pane.

2. Double-click on the Periodic Reports icon.

3. Select the E-Mail Periodic Report from the Periodic Reports drop box. Any selected devices with 

previously created report generation entries of this type are displayed.

4. Click Add, then select one or more NetBotz devices from the device selection list and click Next. 

5. A Periodic Report configuration interface window opens. This window contains the following 

fields:

Enabled

Check this check box to enable periodic e-mail reporting.

Include camera pictures

Check this check box to include current image captures by 
Camera Pod 120s connected to the NetBotz device in the e-
mailed report. Image captures that are included with periodic 
reports are 640x480 resolution, regardless of appliance Camera 
settings.

Include maps

Check this check box to include any maps that are stored on the 
appliance in the e-mailed report.

Include graphs

Check this check box to include graphs of the sensor readings 
for all sensors that are associated with the appliance in the e-
mailed report.

Interval

The frequency with which e-mail reports will be generated.

Sensor priority

Acts as a filter that can be used to limit the amount of sensor 
data that is included with the periodic report.  You can select 
High, Medium, or Low priority settings:
• High: Only sensor data associated with physical sensors that 

are integrated with or connected to the appliance are included 
in the report.  Sensor data associated with remote devices, 
such as MIB II data gathered from remote targets using Basic 
Device Crawlers and Advanced Data that is gathered using 
add-on applications such as Advanced Device Crawlers, is not 
included in the report.

• Medium: Sensor data associated with physical sensors and 

with Advanced Data sensor sets from remote devices (such as 
that which is gathered using Advanced Device Crawlers) is 
included in the report.  Data associated with remote devices 
that is not grouped in an Advanced Data sensor set, such as 
MIB II data gathered from remote targets using Basic Device 
Crawlers, is not included in the report.

• Low: Sensor data from all sensors is included in the report.