APC AP95100 Power supplier AP95100 User Manual

b.By default, all time periods in the schedule are set to Enabled. To disable the threshold for a 

currently enabled period of time, highlight the period of time by clicking-and-dragging over the 
desired time range, and then click Disable. To enable the threshold for a currently disabled 
period of time, highlight the period of time by clicking-and-dragging over the desired time 
range, and then click Enable.

c. When you have finished creating your Advanced Threshold, click OK to save the schedule and 

return to the Thresholds task.

– Select an Alert Severity value for this threshold. Available Alert Severities are, in order of 

escalating severity: Information, Warning, Error, Critical, or Failure. By default, the Alert 
Severity generated by this threshold will be “Error.”

– Select Cameras to Trigger in response to the alert. To include images from one or more connected 

NetBotz Camera Pod 120s, check the check boxes that correspond to the desired pods. 

– Specify a User-specified URL and User-specified Description. You can use these fields to include 

additional user-specific information with any alert notifications that are generated using this 
threshold. 

– Check the Return-To-Normal Requires User Input check box. When checked, if this threshold is 

exceeded the sensor will not report a Return-To-Normal state until a user with Administrator or 
Application (with Alert Update) privileges opens the resulting alert entry in the Alerts View and 
clicks the Mark Alert Resolved button.

7. Click Finish to save this threshold.

A minimum value threshold is defined by specifying a minimum acceptable value for selected sensors. If 
the value reported by the sensor falls below the specified value an alert condition is reported.