APC AP95100 Power supplier AP95100 User Manual

Application (with Alert Update) privileges opens the resulting alert entry in the Alerts View and 
clicks the Mark Alert Resolved button.

7. Click OK to save this threshold.

Detailed instructions on how to define each of the available state threshold types follow.

An alert state threshold is defined by specifying the state which, if reported by selected sensors, will 
cause an alert condition to be reported. If the state reported by the sensor is the specified state for any 
length of time an alert condition is reported. 

To define an alert state threshold:

1. Launch the Sensor & Alert Settings task that corresponds to the state-based sensor for which you 

will define a threshold.

2. Select Alert State Threshold from the Threshold drop box. Any selected devices that have 

previously defined alert state thresholds will be listed in the Management Devices list.

3. Select the desired threshold operation and targets:

– If you are editing one or more previously defined alert state thresholds, select the devices on 

which the threshold has been configured from the Management Devices list and then click Edit.

– If you are defining a new alert state threshold click Add. Then, select one or more devices for 

which this threshold will be configured, and click Next. Finally, select the sensors on the selected 
devices for which this threshold will be configured and then click Next.

4. Type in the Threshold name field a name for this threshold.

5. Specify Basic threshold settings. From the Basic tab in the Thresholds pane: