APC AP95100 Power supplier AP95100 User Manual

Use the Backup task to save your device configurations to password-protected, encrypted files. This 
backup file, which is stored on the InfraStruXure Central device, contains the entire device configuration, 
including user accounts settings, pod configurations, alert actions and profiles. Once a device 
configuration is saved, you can use the Restore task (see “Restore” on page 214) to restore the device 
configuration at a later date.

To use the Backup task: 

1. Launch the Backup task. In addition to the IP address/hostname and status of each selected device, 

the Backup task's device selection window also includes one task-specific information column: Last 
Backup, which displays information about the last backup that was performed on each device. To 
continue, select one or more devices from the device selection window and click Backup.

2. Type in the Password field the password that will be used to protect this backup file. Note that 

without this password you will not be able to use the Restore task to decrypt and restore the device 
settings. 

3. Type the password again in the Verify password field.

4. Click OK to back up the configuration of any selected devices.

Use the Camera Configuration task to configure cameras integrated with supported devices, and Camera 
Pod 120s or CCTV Adapter Pods that connected to NetBotz 500 or 420 devices. You can use the Camera 
Configuration task to specify camera image capture settings, including mode, frame rate, total number of 
images to be captured when alerts are reported, and total number of images saved prior to an alert 
condition to include in alert notifications. 

After you select a group from the Group list or one or more devices from the Devices in... list and start the 
Camera Configuration task the device selection window appears. In addition to the IP address/hostname 
and status of each selected device, the Camera Configuration device selection window also includes the 
following task-specific information columns: 

• Monitored Device: The label that is assigned to the device, if any.

• Mode: Each device's current resolution setting. This setting specifies the resolution at which images 

are captured for use in alert notifications. 

• Maximum Rate: Each device's current maximum rate setting. This setting specifies the refresh rate 

for image captures when a picture alert is triggered.