APC AP95100 Power supplier AP95100 User Manual
![APC](https://files.manualsbrain.com/attachments/434134065d5c651f4d733496e262a45a75ce3ca6/common/fit/150/50/cb1a8b6f231ef4d783dd99279a1457344a0d4d6facb230ab9b5ba2f65edf/brand_logo.png)
Product codes
AP95100
Mass Configuration: Device Settings
180
InfraStruXure Central 4.1 User’s Reference
Specifying Global SNMP Settings
Click Global SNMP Settings to configure SNMP settings that will be used by Device Scanner for all
SNMP target communications. The Global SNMP Settings window opens.
SNMP target communications. The Global SNMP Settings window opens.
This window contains the following fields:
Type the appropriate values in the fields, and then click OK to save the global SNMP settings.
Field
Description
Scan Interval
Use this control to specify the number of minutes that must pass
between Device Scanner target queries.
between Device Scanner target queries.
Maximum Route Hops
Use this control to specify the maximum number of hops that
will be recorded and saved by Device Scanner route tracing
support.
will be recorded and saved by Device Scanner route tracing
support.
Include Route Trace in Alerts check
box
box
Check this check box to enable Device Scanner route tracing
support. If this check box is not checked, route tracing is
disabled and alert notifications will not include route tracing
data.
support. If this check box is not checked, route tracing is
disabled and alert notifications will not include route tracing
data.
Device descriptions version
The version of the device descriptions data file currently stored
on the device.
on the device.
Update Device Descriptions button
Device Scanner uses a device descriptions data file to identify
the System Model, Type, and Vendor value for SNMP targets.
NetBotz periodically updates the contents of the device
descriptions file to include new or previously unidentified target
types as they become available. Click Update Device
Descriptions to contact the NetBotz web site (or browse to a
local device descriptions update file) and update the content of
the Device Scanner device description file.
the System Model, Type, and Vendor value for SNMP targets.
NetBotz periodically updates the contents of the device
descriptions file to include new or previously unidentified target
types as they become available. Click Update Device
Descriptions to contact the NetBotz web site (or browse to a
local device descriptions update file) and update the content of
the Device Scanner device description file.