APC AP95100 Power supplier AP95100 User Manual

Use the Proxy task to provide the necessary settings to enable devices to utilize an HTTP, Socks V4, or 
V5 Proxy Server. When configured, your devices will use the proxy server for all e-mail and HTTP Post 
communications, allowing these communications to cross the firewall. These settings do not apply to 
communications to the device: only communications from the device.

To use the Proxy task: 

1. Launch the Proxy task. In addition to the IP address/hostname and status of each selected device, 

the Clock task's device selection window also includes two task-specific information columns: 

– SOCKS Proxy: Displays the hostname of the SOCKS proxy server that is configured for use with 

this device, if any.

– HTTP Proxy: Displays the hostname of the HTTP proxy server that is configured for use with 

this device, if any.

2. To continue, select one or more devices from the device selection window and click Edit.

3. The Proxy Settings window opens. This window consists of two tabbed panes: the HTTP pane and 

the SOCKS pane. Each of these panes contains the following fields:

4. To change the device Proxy settings, type the new values in the appropriate fields. When you are 

finished, click OK to save any changes to the device. Click Cancel to close this window without 
saving any changes.

Hostname 

The host name or IP address of the proxy server the NetBotz 
device should use for e-mail, HTTP Posts, and other outbound 
communications.

Port 

The IP port number to connect to on the proxy server. 

User name

Some proxy servers can be configured to require a user name 
and password in order to allow access through the server. Use 
this field to specify the user name.

Password/Verify password

Some proxy servers can be configured to require a user name 
and password in order to allow access through the server. Use 
this field to specify the password.