APC AP95100 Power supplier AP95100 User Manual
![APC](https://files.manualsbrain.com/attachments/434134065d5c651f4d733496e262a45a75ce3ca6/common/fit/150/50/cb1a8b6f231ef4d783dd99279a1457344a0d4d6facb230ab9b5ba2f65edf/brand_logo.png)
Product codes
AP95100
Mass Configuration: Device Settings
222
InfraStruXure Central 4.1 User’s Reference
previously created user account, select the account from the Users pane and then click Edit.
4. Type in the Name field a name for this account.
5. Type in the User name field the user name that corresponds to this account.
6. Type in the Password field the password that corresponds to this account.
7. Re-type the password in the Verify password field.
8. Select from the Privilege set drop-box the privilege set that will be assigned to this account.
9. Click OK to save these account settings.
To delete a previously configured account, select the account from the Users pane and then click Remove.
View Device Logs
Use the View Device Logs task to view the contents of the device log of a selected device.
To use the View Device Logs task, launch the View Device Logs task. Then, select a device from the
device selection window and click View to view the contents of the selected device’s log file.
device selection window and click View to view the contents of the selected device’s log file.
Web Server
Use the Web Server task to view or change the IP ports through which selected device web servers
perform HTTP and HTTPS web server communications.
perform HTTP and HTTPS web server communications.
To use the Web Server task:
1. Launch the Web Server task. In addition to the IP address/hostname and status of each selected
device, the SNMP task's device selection window also includes two task-specific information
columns:
columns:
– HTTP Port: Displays the TCP port on which HTTP communications are carried out.
– HTTPS Port: Displays the TCP port on which HTTPS communications are carried out.
2. To continue, select one or more devices from the device selection window and click Edit.
Note
The View Device Logs task can be run only on one device at a time.