TP-LINK TL-PA4010 + 2x TL-WPA4220 TL-WPA4220T KIT User Manual

 

38

 

Step 2.  Within two minutes, press and hold the Pair button on Powerline device A/B for one second.   

Step 3.  Wait for about 60 seconds while your powerline devices are connecting. The Power LED on 

powerline device A/B and C will stop flashing and become solid light when the connection is 
made. 

)

 

Note:  

The sequence of Step 1 and Step 2 can be exchanged. 

Leave an existing Powerline Network: 

As the figure above shows, powerline device A, B and C have formed a powerline network. The user 
wants to remove one device (powerline adapter C) from this network. 

Step 1.  Press and hold the Pair button on powerline device C for at least 10 seconds. Powerline 

device C will reset and restart.   

Step 2.    Wait for the reset to complete. 

To reset the powerline device： 

Press and hold the Reset button more than 5 seconds, and then release the button. You will see all 
LEDs begin to flash. At this moment, the default settings have been restored.   

Be careful, don’t power off when the device is in reset process.