TP-LINK TL-WR841ND User Manual
ON/OFF POWER
WAN
1
2
3
4
WPS/
RESET
WIFI
ON/OFF
ON/OFF POWER
WAN
1
2
3
4
WPS/
RESET
WIFI
ON/OFF
Quick
Installation Guide
Wired
Connect wirelessly by using
the default network name
(SSID) and password
printed on the product label
at the bottom of the router.
the default network name
(SSID) and password
printed on the product label
at the bottom of the router.
Open a web browser on the computer and configure the router according to the following main clues.
Enter http://tplinkwifi.net in the address bar.
Type in admin for both the user name and password
and click Login.
Note: If the login window does not appear, please refer to FAQ->Q1.
Click Finish to complete the setup.
Click Next to continue the Quick Setup.
Via Web Browser
Method 1
300Mbps Wireless N Router
TL-WR841N / TL-WR841ND
2. Configure the Router
Power off the modem,
and remove the backup
battery if any.
Connect the modem to the Internet
port on your router using an Ethernet
cable.
port on your router using an Ethernet
cable.
Power on the modem,
wait for 2 minutes and
then
wait for 2 minutes and
then
power on the router.
Check the following LEDs to
ensure the hardware connection
is correct.
ensure the hardware connection
is correct.
2
1
3
4
Power Off
Power On
Ethernet cable
Power On
Enjoy!
Now your wired and
wireless devices can
connect to the Internet !
wireless devices can
connect to the Internet !
Back
Finish
Congratulations!
Quick Setup-Finish
Exit
Next
To continue, please click the Next button.
To exit, please click the Exit button.
To exit, please click the Exit button.
Quick Setup
a
b
e
c
http://tplinkwifi.net
Or
1. Connect the Hardware
INTERNET
Wireless
Verify or change the wireless network settings, and click Next.
d
Wireless Network Name:
Wireless Password:
TP-LINK_XXXX
XXXXXXXX
Quick Setup- Wireless
Back
Next
Region:
Warning:
Wireless Security:
Note: You may customize your wireless network name and password.
If you do so, please note down the new ones.
Note: If your Internet comes via an Ethernet cable from the wall instead of any DSL/Cable/Satellite modems, please connect the Ethernet cable directly to the router’s WAN port.
INTERNET
INTERNET
7106505177 RE
V5.1.0
1
2
Connect your computer to the router (Wired or Wireless).
admin
admin
Copyright © 2014 TP-LINK Technologies Co., Ltd. All rights reserved.
Login
Auto-Detect
Dynamic IP (Most Common Cases)
Static IP
PPPoE/Russian PPPoE
L2TP/Russian L2TP
PPTP/Russian PPTP
Static IP
PPPoE/Russian PPPoE
L2TP/Russian L2TP
PPTP/Russian PPTP
Back
Next
Quick Setup-WAN Connection Type
Select your WAN Connection Type, or click Auto-Detect
if you are unsure what your connection type is. Click Next
and follow the instructions to continue.
Power
On
WLAN
Flashing
WAN
On/Flashing
Modem
Typical Connection
INTERNET
Wireless N Router
ON/OFF POWER
WAN
1
2
3
4
WPS/
RESET
WIFI
ON/OFF
ON/OFF POWER
WAN
1
2
3
4
WPS/
RESET
WIFI
ON/OFF