TP-LINK AV500 TL-PA4030KIT User Manual

 

22

 

Powerline adapter A and Powerline adapter B form a HomePlugAV Network, Powerline adapter C 
wants to join this network.   

Step 1.  Press and hold the Pair button on Powerline adapter C for 1 second.   

Step 2.  Within 2 minutes, press and hold the Pair button on Powerline adapter A/B for 1 second. 

Step 3.  Wait for about 60 seconds while your Powerline adapters are connecting. The Power 

LEDs on Powerline adapter A/B and C will stop flashing and become solid light when the 
connection is made. 

)

 

Note:  

The sequence of Step 1 and Step 2 can be exchanged. 

Leave an existing Powerline AV Network: 

As the figure above shown, Powerline adapter A, B and C have formed a HomePlugAV Network. 
The user wants to remove one device (Powerline adapter A) from this network. 

Step 1.    Press and hold the Pair button on Powerline adapter A for at least 10 seconds. Powerline 

adapter A will reset and restart. (The Power LED of Powerline adapter A will momentarily 
extinguish during resetting, flash during restarting, and then illuminate steadily.) 

Step 2.    Wait for the reset to complete.