Hameg HMF 2525Arbitrary function generator 10 µHz - 25 MHz Channel type 1 Interface(s)=USB/RS232 Signal outp 25-2525-0000 Data Sheet
Product codes
25-2525-0000
HMF2550
R Frequency Range 10 µHz…25 MHz [50 MHz]
R Output Voltage 5 mV
R Output Voltage 5 mV
pp
…10 V
pp
(into 50 Ω) DC Offset ±5 mV…5 V
R Arbitrary Waveform Generator: 250 MSa/s, 14 Bit, 256 kPts
R Sine, Square, Pulse, Triangle, Ramp, Arbitrary Waveforms
R Sine, Square, Pulse, Triangle, Ramp, Arbitrary Waveforms
incl. Standard Curves (white Noise, Cardiac etc.)
R Total Harmonic Distortion 0.04 % (f
<100 kHz)
R Burst, Sweep, Gating, external Trigger
R Rise Time
R Rise Time
<8 ns, in Pulse Mode 8…500 ns Variable-Edge-Time
R Pulse Mode: Frequency Range 100 µHz…12.5 MHz [25 MHz],
Pulse Width 15 ns…999 s, Resolution 5 ns
R Modulation Modes AM, FM, PM, PWM, FSK (int. and ext.)
R 10 MHz Timebase: ±1 ppm TCXO, rear I/O BNC Connector
R Front USB Connector: Save and Recall of Waveforms and Settings
R 8.9 cm (3.5") TFT: crisp Representation of the Waveform
R 10 MHz Timebase: ±1 ppm TCXO, rear I/O BNC Connector
R Front USB Connector: Save and Recall of Waveforms and Settings
R 8.9 cm (3.5") TFT: crisp Representation of the Waveform
and all Parameters
R USB/RS-232 Dual-Interface, optional Ethernet/USB
Dual-Interface or IEEE-488 (GPIB)
2 5 M H z [ 5 0 M H z ] A r b i t r a r y
F u n c t i o n G e n e r a t o r
H M F 2 5 2 5 [ H M F 2 5 5 0 ]
All Parameters at a glance
on the 3.5" TFT and
interactive Softkeys
on the 3.5" TFT and
interactive Softkeys
Ethernet/USB
Dual-Interface HO730
(Option)
Dual-Interface HO730
(Option)
Generation of complex
Waveforms with 256 kPts
in 14 Bit
Waveforms with 256 kPts
in 14 Bit