Janitza Prodata 2 5224001 Data Sheet
Product codes
5224001
10
ProData II
Parameterisation
The parameterisation of all device functions takes place
via the RS485 serial interface or via Ethernet and with
the GridVis programming software.
via the RS485 serial interface or via Ethernet and with
the GridVis programming software.
The Modbus protocol can be used to change and
retrieve data using the Modbus address list (available on
the Internet or the enclosed CD).
retrieve data using the Modbus address list (available on
the Internet or the enclosed CD).
Additional components that are not
included in the scope of deliverables will be
required for parametrisation via the RS485
interface.
included in the scope of deliverables will be
required for parametrisation via the RS485
interface.
C
GridVis network analysis software
The ProData 2 can be programmed and read out using
the GridVis network analysis software included in
the scope of delivery. For this, a PC must be connected
to the ProData 2 via a serial interface (RS485) or via
Ethernet (see the connection variants).
the GridVis network analysis software included in
the scope of delivery. For this, a PC must be connected
to the ProData 2 via a serial interface (RS485) or via
Ethernet (see the connection variants).
GridVis features
• Programming the ProData 2
• Graphical representation of measured values
• Graphical representation of measured values