Janitza Prodata 2 5224001 Data Sheet

20

The ProData 2 features three digital outputs that have 
a joint reference. The status of each of the outputs is 
shown by the corresponding LED. The corresponding 
LED illuminates red when the output is set to active, 
regardless of whether there is a continuing connection 
to this interface. 

Digital output 1 can also be configured to monitor 
the temperature. This can be switched via the temperature 
measurement input and using a comparator.  

•  The digital outputs can be controlled via Modbus and 

the weekly timer.

•  The digital outputs can display the results of 

comparators.

•  An external auxiliary voltage is required.
•  The digital outputs can be used as pulse outputs.
•  The digital outputs can switch AC and DC loads.
•  The digital outputs are 

not short-circuit proof.

•  Connected cables that are longer than 30 m must 

be shielded when laid.

~