Greisinger GMH 3161-07 Digital Fine Manometer Including Sensor 600534 User Manual

Product codes
600534
Page of 16
H61.0.22.6C-01
User’s Manual GMH3161-07
page 7 of 8
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         
_______________________________________________________________________________________________________________________
GREISINGER electronic GmbH
Hans-Sachs-Straße 26
Fon: 0049-9402 / 9383-0
http://www.greisinger.de
D-93128 Regenstauf
Fax: 0049-9402 / 9383-33
e-mail: info@greisinger.de
7 Specification
Measuring ranges:
Display range:
-10.0 to 350.0 mbar relative (under pressure down to -350.0 mbar, p.r.t. chapter 4)
Overload:
max. 1000 mbar rel. (without destruction or recalibration of sensor being necessary)
Resolution:
0.1 mbar
Pressure units:
mbar, bar, kPa, MPa, mmHg, PSI, mH
2
(display ‚m‘)
, selectable
Accuracy: (typ.)
±0,2%FS (hysteresis and linearity)
±0,4%FS (temperature dependency 0-50°C)
OPTION higher accuracy: 
±0.1%FS (hysteresis and linearity)
±0.4%FS (temperature dependency 0-50°C)
Measuring rate:
4 meas./sec
Nominal temperature:
25°C
Sensor:
Piezo-resistive relative pressure sensor integrated in device. Suitable for air and
non-corrosive and non-ionizing gases and liquids.
(Not suitable for water – use air buffering)
Connection: 
2 metal pressure ports for connection to 6 x 1 mm tubes at the top of device (4mm
inner tube Ø)
Power-Off-Function:  Device will be automatically switched off if no key is pressed/no interface communi-
cation takes place for the time of the power-off delay. The power-off delay can be
set to values between 1 and 120 min.; it can be completely deactivated.
Display:
2 four digit LCDs (12.4mm high and 7 mm high) for measuring values, and for min/
max memories, hold function, etc. as well as additional functional arrows.
Pushbuttons
6 membrane keys
Interface:
Serial interface (3.5mm jack) can be connected to RS232 or USB interface of a
PC via electrically isolated interface adapter GRS3100, GRS3105 or USB3100
(see accessories).
Power supply
9V battery, type: IEC 6F22  (included in scope of supply)
as well as additional d.c. connector (diameter of internal pin 1.9 mm) for external
10.5-12V direct voltage supply.             (suitable power supply: GNG10/3000)
Power consumption: 
approx. 0.6 mA
Low battery warning:
' bAt '
Housing
impact-resistant ABS, membrane keyboard, transparent panel, Front side IP65
Dimensions: 
142 x 71 x 26 mm (L x W x D) + metal pressure ports 11mm at top of device
Weight:
approx. 165 g
Working temperature:
-20...+50°C
Allowable rel. humidity: 0...95 %RH (not condensing)
Storage temperature:
-20...+70°C
EMC:
The device corresponds to the essential protection ratings established in the Regu-
lations of the Council for the Approximation of Legislation for the member countries
regarding electromagnetic compatibility (2004/108/EG).
  Additional fault: 
<1%
8 Disposal notes
This device must not be disposed as ‘residual waste’. To dispose this device, please send it directly to us
(adequately stamped). We will dispose it appropriately and environmentally friendly.
_
+