Manualsbrain.com
  1. Manuals
  2. Brands
  3. APC
  4. Smart-UPS On-Line, 1050 Watts / 1500 VA,Input 120V / Output 120V, Interface Port DB-9 RS-232, Smart-Slot, USB, Rack Height 2 U
  5. User Manual

APC Smart-UPS On-Line, 1050 Watts / 1500 VA,Input 120V / Output 120V, Interface Port DB-9 RS-232, Smart-Slot, USB, Rack Height 2 U SURTA1500RMXL User Manual

Product codes
SURTA1500RMXL
Download
Page of 16
Storage, Maintenance, Transport, and Service
10
Smart-UPS RT SURTA1500XL/SURTA1500XLJ/SURTA2000XL Uninterruptible Power Supply User Manual 
Storage, Maintenance, Transport, and Service
Storage
Store the UPS covered in a cool, dry location with the battery(s) fully charged.
At 5° to 113° F (–15° to 45° C), charge the UPS battery every six months.
To Install a Replacement Battery
This UPS has an easy-to-replace, hot-swappable battery module. Replacement is a safe procedure, iso-
lated from electrical hazards. You may leave the UPS and connected equipment on during the 
replacement procedure.
Refer to the appropriate replacement battery user manual for battery module installation instructions. 
See your dealer or contact APC at www.apc.com for information on replacement battery modules.
Transporting the UPS to Another Location
Perform these steps before transporting the UPS to another location.
1. Shut down and disconnect any equipment attached to the UPS.
2. Shut down and disconnect the UPS from the utility or power supply.
3. Disconnect the battery.
a. Remove the front bezel .
b. Remove the battery cover .
c. Unsnap the battery connectors .
4. Place a protective sticker or packaging between the battery connectors to ensure that the 
connectors do not become re-engaged during transport.
5. Reinstall the battery cover .
Caution
Once the batteries are disconnected, the connected equipment is not protected from 
power outages.
Be sure to deliver the spent battery(s) to a recycling facility or ship it to APC in 
the replacement battery packing material.