MEAN WELL LED driverDC/DC-LED-driver LDD-700L LDD-700L Data Sheet

Product codes
LDD-700L
Page of 6

DC/DC step-down converter

Constant current output: 300mA to 700mA

Wide input voltage: 9 ~ 36VDC

Wide output LED string voltage: 2 ~ 32VDC

High efficiency up to 95%

Built-in EMI filter, comply with EN55015 and FCC part15 without 
     additional input filter and capacitors

Built-in PWM dimming and remote ON/OFF control

Protections: Short circuit / Over temperature

Cooling by free air convection

Fully encapsulated with IP67 level for pin and wire style

Compact size

Low cost, high reliability

Suitable for driving illumination LED

3 years warranty
SPECIFICATION
LDD-300L
LDD-350L
LDD-500L
LDD-600L
LDD-700L
ORDER NO.
CURRENT RANGE
VOLTAGE RANGE
Note.4
CURRENT ACCURACY (Typ.)
OUTPUT
EFFICIENCY (max.)
DC CURRENT
INPUT
PWM
DIMMING
&
ON/OFF
CONTROL
ENVIRONMENT
EMC
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
OPERATING CASE TEMP. (max.)
MTBF
DIMENSION
OTHERS
NOTE
WEIGHT
POTTING MATERIAL
SHORT CIRCUIT
FILTER
REMOTE ON/OFF
PWM FREQUENCY
QUIESCENT INPUT CURRENT
IN SHUTDOWN MODE(max.)
OVER TEMPERATURE
PROTECTION
RIPPLE & NOISE(max.)
Note.2
SWITCHING FREQENCY
EXTERNAL CAPACITANCE LOAD (max.)
95% at full load and 24VDC/36VDC input for LDD-300~700L/LW ; 95% at full load and 24VDC input for LDD-300~700LS
300mA
5mA
9 ~ 36VDC for LDD-300~700L/LW ; 9~ 32VDC for LDD-300~700LS
2.2uF
40KHz ~ 1000KHz
150mVp-p
±5% at 24VDC input
2 ~ 32VDC for LDD-300~700L/LW ; 2~ 28VDC for LDD-300~700LS
300mA
350mA
150mVp-p
350mA
500mA
150mVp-p
500mA
600mA
200mVp-p
600mA
700mA
200mVp-p
700mA
2000Khrs min.  MIL-HDBK-217F (25
)
-40 ~ + 85
(Refer to derating curve)
20% ~ 90% RH  non-condensing for LDD-300~700L/LW ; 20% ~ 85% RH non-condensing for LDD-300~700LS
-55 ~ +125
, 10 ~ 95% RH
±
0.03% /
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
100
22.6*9.9*8.9mm or 0.89"*0.39"*0.35" inch (L*W*H) for LDD-300~700L/LW ; 25.4*10.5*9.3mm or 1"*0.4135"*0.366" inch (L*W*H) for LDD-300~700LS
LDD-300~700L:4g ; LDD-300~700LW:7.3g ; LDD-300~700LS :3.4g
Expoxy(UL94-V0) for LDD-300~700L/LW ; without potted for LDD-300~700LS
 1.All parameters are specified at normal  input(24VDC), rated load, 25  70% RH ambient. 
 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf capacitor. 
 3.Test condition: 24VDC input.
 4.Output voltage will always step down by 3 volts from input DC voltage.
Full load
Note.3
No load
Capacitor
Leave open if not use
Power ON with dimming: DIM ~ -Vin >3.5 ~ 8VDC or open circuit
Power OFF : DIM ~ -Vin < 0.5VDC or short
100 ~ 1KHz
1mA at PWM dimming OFF and 24VDC input
DC-DC Constant Current Step-Down LED driver
L D D - L
s e r i e s
Features :
VOLTAGE RANGE
Tj 150
typically(IC1) detect on main control IC
Regulated at rated output current
Protection type: Can be continued, recovers automatically after fault condition is removed
Protection type : Shut down, recovers automatically after temperature goes down
Compliance to EN55015, FCC part 15 class B
Compliance to EN61000-4-2,3,4,6,8, light industry level, criteria A
File Name:LDD-L-SPEC   2014-09-30
LDD-350L
Blank : pin style
W
S
: wire style
: SMD style
W
EMC IMMUNITY
EMC EMISSION