Crown Battery 12VGC, 12V Ah lead acid battery 12VGC Data Sheet

Product codes
12VGC
Page of 1
Dyno Europe offers a complete line-up
of high-performing and low-maintenance 
commercial deep cycle batteries produced in
 standard BCI industry profiles for voltage,
electrical capacity and physical dimension. 
Dyno Europe’s innovative and proven deep cycle
 product design makes it the battery of choice
 for many tough commercial battery applications,
including commercial floor care and aerial access 
equipment, electric motorcars, personnel carriers,
and  material handling equipment
       PERFORMANCE  12VGC
                           DESIGN SPECIFICATIONS
Nominal Voltage
12 Volts
Acide density fully charge 27° C
1,275 kg/liter +/- 0,01
Theorical  Capacity AH
155 (C20) 130 (C5)
Cover Style:
   Exposed Vent Opening
Reserve Capacity Minutes   77 @ 75 Amperes
Cover Vent Style: 
quarter-turn bayonet  style
Physical
Length 
 13.1/8”  333mm
Container and Cover Material: 
  Black/Bleu Polypropylene
Characteristics
Width 
7.1/16” 
179mm
Case to Cover Seal Method:
   Heat Seal
Height 
 11 3/8”  289mm
Wet Weight 
 38 Kgs
Terminal Options 
DP
DUAL PURPOSE
Fusion Method:
  Cast-On
     ELECTRICAL SPECIFICATIONS
Positive Grid Material: 
  Antimony Lead Alloy
Amp Hour
 20 Hour Rate 7,50 A 155 Ah
Positive Grid Design:
   Z3 Horizontal Pellet
Capacity
 10 Hour Rate 14,72 A 147 Ah
 5 Hour Rate 26 A 130 Ah
 2 Hour Rate 48 A 96 Ah
Negative Grid Material: 
  Antimony Lead Alloy
Resistance int.
Negative Grid Design: 
  Z3 Horizontal Pellet
Charging
12A-18A:100Ah/c20  max 2,65vpc
Capacity
 104 F 40 C 102%
affected by
 80 F 27 C 100%
Separator Type:
  Micro porous Polyethylene w/ Glass
Temperature
 32 F 0 C 65%
LABELS
  CROWN batteries
(20 Ah Rate)
Visit our Website at:
www. Crownbatterieseurope.com
The Power Behind Performance
Data are nominal and should not be construed as maximum or minimum values for specification or for final design. Data for this product type may vary from that shown herein.
8/03/2010
TS 12vgc cROWN