Fujitsu PRIMERGY RX200 S4 VFY:R2004SH010GB Leaflet
Product codes
VFY:R2004SH010GB
Data sheet
⏐ Issue: June 16, 2008⏐ PRIMERGY RX200 S4
Page 2 / 2
Type
Dual Socket Rack Server
System board
D 2671
Chip set
Intel® 5000P
Processors
Dual- or Quad-Core Intel® Xeon® (1 - 2)
Frequencies (GHz)
5148 (2.33) LV 40W DC / L5240 (3.00), 50W,
E5205 (1.86) 65W; X5260 (3.33) 80W DC /
L5310 (1.60), L5410 (2.33), L5420 (2.50) 50W
QC / E5405 (2,00), E5420 (2.50), E5430 (2.66
GHz), E5440 (2.83), 80W, X5460 (3.16) 120W
QC
E5205 (1.86) 65W; X5260 (3.33) 80W DC /
L5310 (1.60), L5410 (2.33), L5420 (2.50) 50W
QC / E5405 (2,00), E5420 (2.50), E5430 (2.66
GHz), E5440 (2.83), 80W, X5460 (3.16) 120W
QC
Front-Side-Bus
1066 (E5205, L5310), 1333 MHz
Second-Level-Cache 4 MB (51xx), 2x 4 MB (53xx), 6 MB (52xx), 2x 6
MB (54xx) ECC
Memory
1 GByte up to max. 48 GByte
4-way interleaved, FullyBuffered DIMM DDR2 FBD667; ECC;
2 boards (1x standard), 12 slots divided into 2 branches with 2
channels each and 3 slots per channel for PC2-5300F modules with
512, 1, 2 and 4 GB; SDDC (Chipkill), Memory Mirroring and hot-spare
option, memory upgrade only possible per branch with module pairs
Flash-EPROM
Local BIOS update with floppy disk; Remote BIOS update via LAN with
Global-Flash
Interfaces
Serial
2 boards (1x standard), 12 slots divided into 2 branches with 2
channels each and 3 slots per channel for PC2-5300F modules with
512, 1, 2 and 4 GB; SDDC (Chipkill), Memory Mirroring and hot-spare
option, memory upgrade only possible per branch with module pairs
Flash-EPROM
Local BIOS update with floppy disk; Remote BIOS update via LAN with
Global-Flash
Interfaces
Serial
1x Serial RS-232-C (9 pin), usable for iRMC
S2 or system or shared
S2 or system or shared
Keyboard, Mouse
2x PS/2
Graphics 1x
VGA
(15-pin)
USB 2.0
2 x front, 2x back, 1x internal for USB stick
LAN
2x System LAN 10/100/1000 RJ45,
1x Service LAN 10/100 (opt. shared on
system LAN)
1x Service LAN 10/100 (opt. shared on
system LAN)
Onboard or integrated controller**
SATA configuration
Chip set ESB2-T
SATA configuration
Chip set ESB2-T
2-channel controller for SATA RAID 0, 1 (for
2x 3.5-inch HDD´s only)
1 x SATA channel for DVD
2x 3.5-inch HDD´s only)
1 x SATA channel for DVD
SAS configuration
in internal PCIe slot
either (LSI 1064)
or LSI 1078
in internal PCIe slot
either (LSI 1064)
or LSI 1078
4 port SAS for internal HDD´s with
RAID 0, 1 (Integrated Mirroring Enhanced
also for odd numbered HD´s for Windows and
Linux)
8 port SAS for internal HDD´s (2.5-inch)
with RAID 0, 1, 10, 5, 6 (256 or 512 MB RAID
Cache and opt. BBU)
RAID 0, 1 (Integrated Mirroring Enhanced
also for odd numbered HD´s for Windows and
Linux)
8 port SAS for internal HDD´s (2.5-inch)
with RAID 0, 1, 10, 5, 6 (256 or 512 MB RAID
Cache and opt. BBU)
LAN
(2x BroadCom5708)
(2x BroadCom5708)
2x 10/100/1000 Mbit/s Ethernet (TCP/IP
acceleration)(PXE-Boot via LAN from PXE
server), iSCSI Boot (also diskless) via
onboard LAN
acceleration)(PXE-Boot via LAN from PXE
server), iSCSI Boot (also diskless) via
onboard LAN
Server management
Integrated Remote Management Controller
(iRMC S2, 32 MB attached memory) incl.
graphics controller, IPMI 2.0 compatible
(iRMC S2, 32 MB attached memory) incl.
graphics controller, IPMI 2.0 compatible
Hard disk drives
73, 146, 300 Gbyte 3.5-inch SAS or
36, 73, 146 Gbyte 2.5-inch SAS or
160, 250, 500, 750 Gbyte 3.5-inch SATA; no
mix of SAS/SATA, no later conversion from
3.5 to 2.5-inch possible
36, 73, 146 Gbyte 2.5-inch SAS or
160, 250, 500, 750 Gbyte 3.5-inch SATA; no
mix of SAS/SATA, no later conversion from
3.5 to 2.5-inch possible
1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible capacity
may vary.
may vary.
I/O Slots
PCIe
1x PCIe x8 Standard or Low Profile – 170 mm length
1x PCIe x8 Low Profile – 170 mm length, and
1x PCI-e x4 internal for modular RAID controller only
Drive bays
for hard disks 2x 3,5-inch for hot-plug SATA/SAS or
1x PCIe x8 Low Profile – 170 mm length, and
1x PCI-e x4 internal for modular RAID controller only
Drive bays
for hard disks 2x 3,5-inch for hot-plug SATA/SAS or
4x 2,5-inch for hot-plug SAS option
for accessible
drives
drives
1 x 3.5/0.5-inch for opt. ServerView Local Service
Panel (LSP) or Local Status Display (LSD)
1 x 5.25/0.5-inch for SATA DVD option
Panel (LSP) or Local Status Display (LSD)
1 x 5.25/0.5-inch for SATA DVD option
System fans
Hot-plug redundant fans (2x 5 +1 redundancy)
Electrical values
1x Hot-plug power supply unit as standard.
Additional hot-plug unit for redundancy option
Hot-plug redundant fans (2x 5 +1 redundancy)
Electrical values
1x Hot-plug power supply unit as standard.
Additional hot-plug unit for redundancy option
Output power
650 W / 1 + 1 x 650 W each
Rated voltage range
100V – 127V / 200V - 240V
Rated frequency
50 - 60 Hz
Max. rated current
100V–127V / 200V-240V / 8A –4A
Rated current in
basic configuration
basic configuration
100V–127V / 200V-240V / 5A –2.5A
Active power
530W
Apparent power
555VA
Heat emission
1900 kJ/h ( 1810 btu/h)
Temperature/Noise/Dimensions/Weight
Ambient temperature
Ambient temperature
10°C - 35°C (DIN IEC 721-3-3) class 3K2
ETSI 300 019-2-3 Class 3.1
ETSI 300 019-2-3 Class 3.1
Declared noise emission
according to ISO 9296
according to ISO 9296
idle* operating* (*ISO 7779)
ETSI 300 753 Class 3.1
ETSI 300 753 Class 3.1
L
WAd
(1 B = 10 dB) :
6.7 B 7.5 B
L
pAm
(bystander position): 50 dB 58 dB
Overall measures
44 * 430 * 770 (mm); (HxWxD)
Rack mounting depth:
Rack height units:
Rack cable depth:
Rack height units:
Rack cable depth:
745 mm,
1 U,
100 mm
(900 mm Rack recommended)
1 U,
100 mm
(900 mm Rack recommended)
Rack integration kit
Telescopic Rails with full extraction or
partial extraction optional
partial extraction optional
Weight
~ 16 kg (depends on configuration)
Compliance with Norms and Standards
Product safety
Global
Product safety
Global
IEC 60950-1
Europe
EN 60950-1
USA
UL 60950-1
Canada
CAN/CSA-C22.2 No. 60950-1
Electromagnetic compatibility
This product and the released accessories, are in compliance with
emission class A. In certain cases measures have to be taken to reduce
the electro magnetic influence to other equipment.
emission class A. In certain cases measures have to be taken to reduce
the electro magnetic influence to other equipment.
Europe
EN 55 022 class A, EN 55024,
EN61000-3-2 / -3, ETSI EN300386
EN61000-3-2 / -3, ETSI EN300386
USA / Canada
FCC class A
Declaration of conformity
Europe (CE)
Europe (CE)
2004/108/EC(EMV);2006/95 EC(LVD)
North America
FCC class A
Approvals
Product safety
Global
Global
CB
Europe
CE
USA / Canada
CSA
US
/ CSA
C
There is general compliance with the safety requirements of all
European countries and North America. National approvals required
in order to satisfy statutory regulations or for other reasons, can be
applied for on request.
European countries and North America. National approvals required
in order to satisfy statutory regulations or for other reasons, can be
applied for on request.
Supported server operating systems
See actual release status
See actual release status
: e.g. Windows Server
2003; Windows Server 2008, Novell SUSE Linux Enterprise Server ,
Red Hat Enterprise Linux; VMware ESX (Support of Debian, Ubuntu,
Mandriva Linux and other Linux derivatives
Red Hat Enterprise Linux; VMware ESX (Support of Debian, Ubuntu,
Mandriva Linux and other Linux derivatives
** For supported controllers (onboard and PCI cards for SAS, SATA,
RAID, LAN, WAN, etc.), please refer to the corresponding system
configurator.
Server Management (see separate data sheets)
Standard
RAID, LAN, WAN, etc.), please refer to the corresponding system
configurator.
Server Management (see separate data sheets)
Standard
PRIMERGY ServerView Suite;
PDA, ASR&R
PDA, ASR&R
Optional (excerpt)
RemoteView, iRMC S2 Advanced Pack
Front panel
On/off switch; NMI-, reset button; LEDs for global error (amber/
yellow for Health and CSS), identification (blue), hard disks access
(green), power (amber/green); (back: global error, identification, LAN
activity, LAN mode)
On/off switch; NMI-, reset button; LEDs for global error (amber/
yellow for Health and CSS), identification (blue), hard disks access
(green), power (amber/green); (back: global error, identification, LAN
activity, LAN mode)
All rights reserved, including intellectual property rights. Technical data subject to modifications and
delivery subject to availability. Any liability that the data and illustrations are complete, actual or
correct is excluded.
Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which
by third parties for their own purposes may infringe the rights of such owner.
For further information see http://www.fujitsu-siemens.com/terms_of_use.html
delivery subject to availability. Any liability that the data and illustrations are complete, actual or
correct is excluded.
Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which
by third parties for their own purposes may infringe the rights of such owner.
For further information see http://www.fujitsu-siemens.com/terms_of_use.html
Copyright © Fujitsu Siemens Computers 07/2008
Published by
Company stamp