Phoenix Contact FO converters PSI-MOS-RS485W2/FO 660 T 2708300 2708300 Data Sheet

Nov 13, 2013    1 / 15

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in

the user's documentation. Our General Terms of Use for Downloads are valid

(http://download.phoenixcontact.com)

FO converter with integrated optical diagnosis, alarm contact, for RS-485 2-wire bus systems

(SUCONET K, Modbus ...) up to 500 kbps, NRZ coding, T-coupler with two FO interfaces (FSMA),

660 nm, for polymer/HCS fiber cable

 

Product Features

 Can be combined with the PSI copper repeater in a modular way using DIN rail connectors
 Supply voltage and data signals routed through via DIN rail connectors
 Connections can be plugged in using a COMBICON screw terminal block
 Automatic data rate detection or fixed data rate setting via DIP switches
 High-quality electrical isolation between all interfaces (RS-485 // fiber optic ports // power supply // DIN rail connector)
 Redundant power supply possible by means of optional system power supply unit
 Approved for use in zone 2
 Floating switch contact for leading alarm generation in relation to critical fiber optic paths
 Integrated optical diagnostics for continuous monitoring of fiber optic paths
 Intrinsically safe fiber optic interface (Ex op is) for direct connection to devices in zone 1
 Suitable for data rates up to 500 kbps

   

   

  

Key commercial data

1

4017918974008

Technical data

Note:

EMC: class A product, see manufacturer's declaration in the

download area

Dimensions

35 mm

99 mm

105 mm

Ambient conditions

-20 °C ... 60 °C

-40 °C ... 85 °C

30 % ... 95 % (no condensation)