Fujitsu PRIMERGY RX300 S4 VFY:R3004SF060DE Leaflet
Product codes
VFY:R3004SF060DE
Data Sheet
⏐ Issue: 5/9/2008⏐ PRIMERGY RX300 S4
Page 2 / 2
Type
Dual Socket Rack Server
System board
D 2519
Chip set
Intel® 5000P
Processors
Dual- or Quad-Core Intel® Xeon® (1 – 2)
Frequencies (GHz)
5148 (2.33) LV 40W DC / E5205 (1.86) 65W;
L5240 (3.00) 50W, X5260 (3.33) 80W DC /
L5310 (1.60), L5410 (2.33), L5420 (2.50)
50W QC / E5405 (2,00), E5420 (2.50),
E5430 (2.66 GHz), E5440 (2.83), 80W,
X5460 (3.16) 120W QC
L5240 (3.00) 50W, X5260 (3.33) 80W DC /
L5310 (1.60), L5410 (2.33), L5420 (2.50)
50W QC / E5405 (2,00), E5420 (2.50),
E5430 (2.66 GHz), E5440 (2.83), 80W,
X5460 (3.16) 120W QC
Front-Side-Bus/
Socket
1066 (E5205, L5310), 1333 MHz
Second-Level-Cache 4 MB (51xx), 2x 4 MB (53xx), 6 MB (52xx),
2x 6 MB (54xx) ECC
Memory
1 Gbyte up to max. 48 Gbyte
4-way interleaved, FullyBuffered DIMM DDR2 PC2-5300F; ECC;
2 boards (1x standard), 12 slots divided into 2 branches with 2
channels each and 3 slots per channel for PC2-5300F modules with
512, 1, 2 and 4 GB; SDDC, Memory Mirroring and hot-spare option,
memory upgrade only possible per branch with module pairs
Flash-EPROM
2 boards (1x standard), 12 slots divided into 2 branches with 2
channels each and 3 slots per channel for PC2-5300F modules with
512, 1, 2 and 4 GB; SDDC, Memory Mirroring and hot-spare option,
memory upgrade only possible per branch with module pairs
Flash-EPROM
Local BIOS update with floppy disk; Remote BIOS-Update via LAN
with Global Flash and service partition
Interfaces
with Global Flash and service partition
Interfaces
Serial
1x RS-232-C (9-pin) (usable for iRMC
or system or shared)
or system or shared)
Serial (option)
1x RS-232-C (9-pin) occupies PCI-slot 1
Parallel (option)
Centronics, 25-pin, EPP/ECP comp.
(occupies PCI-slot 5)
(occupies PCI-slot 5)
Keyboard, Mouse
2x PS/2
USB 2.0
2x front, 2x back; (OHCI, 480 Mbit/s)
2x internal
2x internal
Graphics 1x
VGA
(15-pin)
LAN
2x RJ45, 1x Service10/100 (can be switched
on Gbit LAN port)
on Gbit LAN port)
Front Panel
On/off switch; NMI-, reset button; LEDs for global error (amber/
yellow for Health and CSS), identification (blue), hard disks access
(green), power (amber/green); (back: global error, identification, LAN
activity, LAN mode)
Onboard controller **
On/off switch; NMI-, reset button; LEDs for global error (amber/
yellow for Health and CSS), identification (blue), hard disks access
(green), power (amber/green); (back: global error, identification, LAN
activity, LAN mode)
Onboard controller **
ESB2-T
2 x SATA channel for DVD + backup
SAS configuration
in internal PCIe slot
in internal PCIe slot
either (LSI 1068)
or LSI 1078
8 port SAS for internal HDD´s and internal
backup devices with
RAID 0, 1 (Integrated Mirroring Enhanced
also for odd numbered HD´s for Windows
and Linux)
with RAID 0, 1, 10, 5, 50, 6, 60 (256 or 512
MB RAID Cache and opt. BBU)
backup devices with
RAID 0, 1 (Integrated Mirroring Enhanced
also for odd numbered HD´s for Windows
and Linux)
with RAID 0, 1, 10, 5, 50, 6, 60 (256 or 512
MB RAID Cache and opt. BBU)
LAN
(2x BroadCom5708)
2x 10/100/1000 Mbit/s Ethernet (TCP/IP
accelerator)(PXE-Boot via LAN from PXE
server), iSCSI Boot (also diskless) via
onboard LAN
accelerator)(PXE-Boot via LAN from PXE
server), iSCSI Boot (also diskless) via
onboard LAN
Server management
Integrated Remote Management Controller
(iRMC S2, 32 MB attached memory) incl.
graphics controller, IPMI 2.0 compatible
(iRMC S2, 32 MB attached memory) incl.
graphics controller, IPMI 2.0 compatible
TPM (option)
Infineon / 1.2
Hard disk drives
(all hot-plug)
(all hot-plug)
36, 73, 146, 300 Gbyte 3.5-inch SAS and/or
250, 500, 750 Gbyte 3.5-inch SATA or 36,
73, 146 Gbyte 2.5-inch SAS optional; 3.5-
inch SAS / SATA Mix only in separate RAID
sets, no later conversion 3.5 to 2.5-inch
250, 500, 750 Gbyte 3.5-inch SATA or 36,
73, 146 Gbyte 2.5-inch SAS optional; 3.5-
inch SAS / SATA Mix only in separate RAID
sets, no later conversion 3.5 to 2.5-inch
1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible
capacity may vary.
capacity may vary.
I/O Slots
5x PCIe x8, x4 wired low profile (from 4 PCIe slots each two wired x4
slots can be combined to one wired x8 slot)
1 x PCI-X 64-bit / 133 MHz, low profile; 3.3 V
Drive bays
for hard disks
slots can be combined to one wired x8 slot)
1 x PCI-X 64-bit / 133 MHz, low profile; 3.3 V
Drive bays
for hard disks
6x 3,5/1-inch, for SAS / SATA or
6 or 12x 2,5/1-inch for SAS optional
6 or 12x 2,5/1-inch for SAS optional
for optional
accessible drives
accessible drives
1x 5.25/0.5-inch, for CD or DVD-ROM
1x 3.5/0.5-inch for LSP or LSD or FD
1x 3.5/1.6-inch for backup occupies 2x 3.5 or
6x 2.5-inch HDD bay
1x 3.5/0.5-inch for LSP or LSD or FD
1x 3.5/1.6-inch for backup occupies 2x 3.5 or
6x 2.5-inch HDD bay
System fan units (hot-plug)
Standard / redundant (option): 1 + 1 units, 4 fans each
Electrical values
1x Hot-plug power supply unit as standard.
Additional hot-plug unit for redundancy option
Output power
Standard / redundant (option): 1 + 1 units, 4 fans each
Electrical values
1x Hot-plug power supply unit as standard.
Additional hot-plug unit for redundancy option
Output power
700 W / 1 + 1 x 700 W each
Rated voltage range
100 - 240 V
Rated frequency
50-60 Hz
Max. rated current
100 V - 240 V / 8.0 A – 3.5 A
Rated current in basic
configuration
configuration
100 V - 240 V / 4.2 A – 1.4 A
Active power
726 W
Apparent power
737 VA
Heat emission
2614 kJ/h (2477 btu/h)
Temperature/Noise/Dimensions/Weight
Ambient temperature
Ambient temperature
10°C - 35°C (DIN IEC 721-3-3) class 3K2,
ETSI 300 019-2-3 Class 3.1
ETSI 300 019-2-3 Class 3.1
Declared noise emission
according to ISO 9296
according to ISO 9296
idle* operating* *(ISO 7779)
ETSI 300 753 Class 3.1
ETSI 300 753 Class 3.1
L
WAd
(1 B = 10 dB)
6.9 B 6.9 B
L
pAm
(bystander position)
52 dB 52 dB
Overall measures
85.9 * 482.6 * 785 (mm); (HxWxD)
Rack mount depth / U:
Rack cable depth:
Rack cable depth:
745 mm / 2 U,
100 mm (900mm Rack recommended)
100 mm (900mm Rack recommended)
Rack integration kit
Telescopic Rails with full extraction or
partial extraction optional
partial extraction optional
Weight
~ 25 kg (configuration dependent)
Compliance with Norms and Standards
Product safety
Global / Europe
Product safety
Global / Europe
IEC 60950-1 / EN 60950-1
USA
UL 60950-1
Canada
CAN/CSA-C22.2 No. 60950-1
Electromagnetic compatibility
This product and the released accessories, are in compliance with
emission class A. In certain cases measures have to be taken to reduce
the electro magnetic influence to other equipment.
emission class A. In certain cases measures have to be taken to reduce
the electro magnetic influence to other equipment.
Europe
EN 55 022 class A, EN 55024,
EN61000-3-2 / -3-3, ETSI EN300386
EN61000-3-2 / -3-3, ETSI EN300386
Taiwan / Japan
BSMI class A; VCCI class A /JEIDA
Australia / New Zealand
C-Tick class A
USA / Canada
FCC class A
Declaration of conformity
Europe (CE)
Europe (CE)
2004/108/EC(EMV);2006/95/EC(LVD))
North America
FCC class A
Approvals
Product safety
Global / Europe
Product safety
Global / Europe
CB / CE
USA / Canada
CSA
US
/ CSA
C
There is general compliance with the safety requirements of all
European countries and North America. National approvals required
in order to satisfy statutory regulations or for other reasons, can be
applied for on request.
European countries and North America. National approvals required
in order to satisfy statutory regulations or for other reasons, can be
applied for on request.
Supported server operating systems
See actual release status
See actual release status
: e.g. Windows Server
2003; Windows Server 2008, Novell SUSE Linux Enterprise Server ,
Red Hat Enterprise Linux; VMware ESX (Support of Debian, Ubuntu,
Mandriva Linux and other Linux derivatives
Red Hat Enterprise Linux; VMware ESX (Support of Debian, Ubuntu,
Mandriva Linux and other Linux derivatives
** For supported controllers (onboard and PCI cards for SAS, SATA,
RAID, LAN, WAN, etc.), please refer to the corresponding system
configurator
Server Management (see separate data sheets)
RAID, LAN, WAN, etc.), please refer to the corresponding system
configurator
Server Management (see separate data sheets)
Standard:
PRIMERGY ServerView Suite; PDA, ASR&R
Optional
(excerpt):
(excerpt):
ServerView Local Service Panel (LSP) or Local
Service Display (LSD), ServerView Remote
Management, iRMC S2 Advanced Pack
Service Display (LSD), ServerView Remote
Management, iRMC S2 Advanced Pack
All rights reserved, including intellectual property rights. Technical data subject to modifications and
delivery subject to availability. Any liability that the data and illustrations are complete, actual or
correct is excluded.
Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which
by third parties for their own purposes may infringe the rights of such owner.
For further information see http://www.fujitsu-siemens.com/terms_of_use.html
Copyright © Fujitsu Siemens Computers 05/2008
delivery subject to availability. Any liability that the data and illustrations are complete, actual or
correct is excluded.
Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which
by third parties for their own purposes may infringe the rights of such owner.
For further information see http://www.fujitsu-siemens.com/terms_of_use.html
Copyright © Fujitsu Siemens Computers 05/2008
Published by
Company stamp