Alinco BREITBANDEMPF./SCANNER DJ-X-11 1267 Data Sheet
Product codes
1267
18
3. Attaching Accessories
3
3-6 Charging the Battery Pack with the Charger
Using the supplied charger completes charging in about four hours from a state
of complete discharge.
of complete discharge.
1
Connect the plug of the AC adapter to the charger.
2
Plug the AC adapter into a wall
outlet and place the DJ-X11 on
the charger.
the charger.
During charging, the red lamp of the
charger illuminates.
When the charging is complete,the lamp
goes off.
EDC-174 doesn't charge when EBP-74 is
fully charged and thered lamp stays off.
charger illuminates.
When the charging is complete,the lamp
goes off.
EDC-174 doesn't charge when EBP-74 is
fully charged and thered lamp stays off.
MEMO
• If charging fails with the battery pack attached to the receiver, try
charging the battery pack alone and check the operation.
• The battery pack can also be charged by using the optional PC con-
nection cable (ERW-8). (About eight hours)
3-7 Preventing the Battery Pack from Short-circuiting
Take extreme caution when carrying the battery pack. A current surge caused
by short-circuiting may cause a fi re.
by short-circuiting may cause a fi re.
DON’T carry with metals
of any type, e.g. chains.
of any type, e.g. chains.
DON’T carry the battery
pack inside bags made of
conductive materials.
pack inside bags made of
conductive materials.
DON’T place in the
proximity of metals or
conductives, e.g. nails,
chains.
proximity of metals or
conductives, e.g. nails,
chains.
Do enclose inside a non-conductive enclosure. (bags
or handkerchief made only of non-conductive material)
or handkerchief made only of non-conductive material)
Do protect by spreading a
non-conductive sheet on
a flat surface.
non-conductive sheet on
a flat surface.