Samson Stage 466 Wirless Microphone SWV466SHT6 Data Sheet

No Audio

Turn on the HT6 transmitter using the Power ON/OFF switch.
Ensure the HT6 transmitter’s batteries are installed correctly.
Check that the HT6 Audio ON/OFF switch is in the ON position.
Confirm that the SR466 adaptor is correctly connected and 

plugged into an electrical outlet.
Turn on the SR466 receiver.
Make sure the SR466 output and audio input connections are 

securely connected.
Ensure that the SR466 receiver and HT6 transmitters are in line of 

sight with one another. 
Check the receiver and audio input device level controls. 

Distorted Audio

Check the receiver output level and audio input device level.
Check the HT6’s batteries and replace if low.
Another transmitter may be broadcasting on the same channel. 

Turn off transmitter that may be causing interference. 

Audio Dropout

The transmitter may be too far away from the receiver. Move 

closer to the receiver, or reposition the antennas.
Remove or avoid sources that may cause RF interference, such 

as cell phones, cordless phones, lighting equipment, computers, 

metal structures, etc.

Transmitters and Receiver 

on Different Channels

Contact your Samson reseller or distributor for assistance. 

Stage v466: Quad Vocal Wireless System