Transmode Node Management Board 6001/01 Data Sheet
Product codes
6001/01
Technical Data
www.transmode.com
info@transmode.se
+46 (0)8 527 675 50
+46 (0)8 527 675 99
info@transmode.se
+46 (0)8 527 675 50
+46 (0)8 527 675 99
web:
email:
telephone:
fax:
Transmode Systems AB
Jakobsdalsvagen 17
SE-126 53 Hagersten
Sweden
Jakobsdalsvagen 17
SE-126 53 Hagersten
Sweden
DS-Chassis
Rev C March 2008
The NMB 6001 is a plug-in unit for either the TS-1100 or the TS-100. This plug-in unit contains the
Element Node Management software used to manage Transmode network elements. Used in small
to medium sized networks or in element manager mode, the NMB 6001 presents the node
information with graphical elements and easy data overview in a standard web browser. In large
fibre optical installations, the NMB 6001 is used as node manager and a transfer agent to higher
level network management systems, like Transmode TNM, using industry-standard SNMP as a
network management protocol.
Element Node Management software used to manage Transmode network elements. Used in small
to medium sized networks or in element manager mode, the NMB 6001 presents the node
information with graphical elements and easy data overview in a standard web browser. In large
fibre optical installations, the NMB 6001 is used as node manager and a transfer agent to higher
level network management systems, like Transmode TNM, using industry-standard SNMP as a
network management protocol.
For advanced fault tracing or configuration, data is presented in data logs with proper date and time
stamps. The NMB 6001 handles all plug-in units in the TS-Series. All active units have support for
“hot-swap” and the NMB 6001 automatically discovers new units and saves all configuration
changes in an event log. Plug-in units may be replaced anytime without the need for manual
configuration thanks to the Inheritance Feature of the system.
stamps. The NMB 6001 handles all plug-in units in the TS-Series. All active units have support for
“hot-swap” and the NMB 6001 automatically discovers new units and saves all configuration
changes in an event log. Plug-in units may be replaced anytime without the need for manual
configuration thanks to the Inheritance Feature of the system.
The specifications and information within this document are subject to change without further notice.
All statements, information and recommendations are believed to be accurate but are presented without warranty of any kind.
All statements, information and recommendations are believed to be accurate but are presented without warranty of any kind.
Dimensions (Height x width x depth)
Power consumption
TS-1100 (9013)
TS-100 (9002)
Passive PIU holder (9320)
Fibre Management tray (9310)
265 x 483 x 242 mm / 10.4 x 19.0 x 9.5”
Maximum 240 W
Muxponder
5400/03
10G Transponder
7900
Mux/DeMux
&
AD-filters
The TS-Series
Transponders
provide a
completely
integrated solution
to convert client
signals to run over
C/DWDM
channels. There
are several
modules available
covering a wide
range of protocols
from 100Mb/s to
10Gb/s. The
TS-Series
Transponders are
bit rate
transparent
requiring no pre-
configuration or
on-site
provisioning.
265 x 483 x 242 mm / 10.4 x 19.0 x 9.5”
44 x 483 x 240mm / 1.75 x 19.0 x 9.44”
44 x 483 x 228 mm / 1.75 x 19.0 x 9”
22 x 483 x 104 mm / 0.9 x 19.0 x 4.1”
22 x 483 x 104 mm / 0.9 x 19.0 x 4.1”
Maximum 50 W
NA
NA
NA
Node Management Board
More complex networks can be managed using the network
management solution Transmode TNM. The Transmode
Management Platform is a modular and scalable management
solution for the TS-Series and TM-Series platforms. This is a
client-server based solution that can be installed on computers
using Windows, Linux or Solaris operating systems (i.e. PC's and
Unix work stations).
management solution Transmode TNM. The Transmode
Management Platform is a modular and scalable management
solution for the TS-Series and TM-Series platforms. This is a
client-server based solution that can be installed on computers
using Windows, Linux or Solaris operating systems (i.e. PC's and
Unix work stations).
Transmode TNM gives a total control of the network with fault
management,
management,
performance
management,
configuration
management, security management, software upgrade,
graphical interface etc. Alarm notification can as an option be
provided via SMS or email. Transmode TNM also has a CORBA
interface according to 3GPP standard (FM, PM).
Some key features of the TNM are listed below:
graphical interface etc. Alarm notification can as an option be
provided via SMS or email. Transmode TNM also has a CORBA
interface according to 3GPP standard (FM, PM).
Some key features of the TNM are listed below:
Platform independent solution for Network Management of
Transmode TM-Series and TS-Series.
CLI or GUI access to embedded Node Manager ENM
Standardized management protocols SNMP supporting v2c
& v3 for easy northbound integration
End-to-end optical circuit fault management
Physical & logical subnetwork topology presentation
Circuit Availability Calculations for validation of SLA
agreements
Scheduled PM data collection with graphical presentation
Software upgrade and configuration up/download
Transmode TM-Series and TS-Series.
CLI or GUI access to embedded Node Manager ENM
Standardized management protocols SNMP supporting v2c
& v3 for easy northbound integration
End-to-end optical circuit fault management
Physical & logical subnetwork topology presentation
Circuit Availability Calculations for validation of SLA
agreements
Scheduled PM data collection with graphical presentation
Software upgrade and configuration up/download
!
!
!
!
!
!
!
!
!
!
!
Transmode Network Manager
Node Management
Board
Main web page of TS-Series ENM