Greisinger GOX 100 T Oxygen Meter with Sensor 600222 Data Sheet



  Double display for oxygen and temperature



  Measured units: O

2

-concentration and 

O

2

-partial pressure

 

Alarm detector with integrated horn



  Automatic temperature compensation



  Min./Max. value memory, Hold function



  Serial interface, device can be connected 

to bus system (up to 5 devices can be con-

nected to one PC interface)



  Battery and d.c. operation



  Wide range of application



  Most simple calibration in atmospheric air

Calibration:  1-point calibration: extremely 

simple quick calibration in atmospheric air. (press 

button to compensate unit to 20.9%).

2-point calibration: fi rst point at atmospheric air 
(20.9%), second point freely selectable
Application:  Wide range of application for your 

home, job and hobby! For example:

- Bio chemistry: Oxygen monitoring in breeding 

chambers for cell cultures. Monitoring of fermen-

ting process of fruits in fermentation plants etc.

- Medicine: Monitoring of oxygen concentration 

in respirators; checking of breathing, monitoring 

of oxygen concentration in incubators, oxygen 

tents etc.

- Food technology: Monitoring of residual oxygen 

in packages (e.g. coffee, tea, etc.). Monitoring of 

oxygen content during production processes.

Oxygen monitoring in mines/pits, underground 

parking lots, wine cellars, cooling chambers, 

greenhouses or stores. Oxygen monitoring or 

alarm in case of danger of suffocation when 

working in tanks, wells etc.

Oxygen measurements, air quality monitoring, 

measuring of oxygen concentration in enclosed 

air conditioning systems, etc.

- Sport: Checking of oxygen content in com-

pressed air breathing apparatuses (diving, etc.), 

oxygen monitoring for gliding.
The device can only be used to check during 

Measuring ranges:    

Oxygen concentration:    0,0 ... 100,0 % O

2

 

            (gaseous)

Partial oxygen pressure:   0 ... 1100 hPa O

2

Temperature:    -5,0 ... 50,0 °C

(device) (at nominal temperature = 25°C)

Oxygen concentration:    ±0.1% ±1digit

Partial oxygen pressure:  ±1 hPa ±1digit

Temperature:    ±0.1°C ±1digit

Sensor connection: 6-pin screened Mini-DIN-

socket.

Display: two 4 digit LCDs 

(12.4mm or 7mm high)

,

as well as additional arrows.

Pushbuttons: 6 membrane keys for ON/OFF-

switch, selection of meas. range, min- and max- 

value memory, hold-function, calibration etc.

Working temperature: 0 to +50°C 

Relative humidity:  0 to +95%RH 

(non-condensing)

Storage temperature:  -20 to +70°C

Interface:  serial interface,

direct connection to RS232 or USB interface of 

a PC via electrically isolated interface converter 

GRS3100 or GRS3105 resp. USB3100 (p.r.t. 

accessories).

Power supply: 9V-battery, type IEC 6F22

(in-

cluded),

 as well as additional d.c. connector for 

external 10.5-12V direct voltage supply. (suitable 

power supply: GNG10/3000)
Power-Off-function: 1...120min (can also be 

deaktivated).
Power consumption: approx. 1.5 mA

 and ' bAt '

Dimensions: 142 x 71 x 26 mm (H x W x D)

Impact-resistant ABS plastic housing, membrane 

keyboard, transparent panel. Front side IP65, 

integrated pop-up clip.

Weight: approx. 160 g  (cpl. with battery)

Min-/Max-value memory: max. and min. values 

will be memorized.

Hold function: by pressing a button the current 

meas. value will be memorized.

Alarm: integrated limit detector for min. or max. 

alarm.

Temperature compensation: automatic via tem-

perature sensor, integrated in probe housing. 

Air pressure compensation: The O

2

 concen-

tration will be compensated according to the abs.

  atmospheric pressure set (500...2000hPa).

GMH

 

3691 

Sensor not included - please order separately!

 

case

(275 x 229 x 83 mm)

 with punched lining suitable for GMH3xxx

interface converter,

 electrical isolated, for RS232

interface converter 

 with 5 connection points, electr. isolated, for the

 connection of 5 GMH3xxx to one PC (RS232).

device protection bag

 with cut-out for probe connection

spare sensor for GOX 100

spare sensor for GOX 100T

spare tube-adapter 

spare T-piece 

case

(235 x 185 x 48 mm)

 with foam lining

GOX

 

100 

1-Button Calibration 

Automatic Power-Off 

Min-/max- value memory

Incl. sensor GOEL 369

GOX

 

100T 

1

-Button Calibration 

MOD-Display

(Maximum Operating Depth) 

HOLD function

Incl. sensor GOEL 370

•

•

•

•

•

•

•

•

Meas. range: 0,0 ... 100,0 % O

2

Accuracy: ± 0,1 % O

2

  ± 1 digit

Sensor Connection: jack-connector cable

Sensor: Oxygen-partial pressure probe,

mounted in external sensor housing

Warranty:     

  

12 months 

Working pressure:  0,5 to 2,0 bar absolute

Over-/under-pressure: max. 0,25 bar

Working temperature: 0 to 50°C (sensor GOX 100)

              

   0 to 45°C (sensor GOX 100T)

 

         

  -20 

to 

50°C 

(device)

Relative humidity:    0 to +95%RH 

Power supply:   9V battery type IEC 6F22

Power consumption: approx. 120µA 

(over 2500 h) 

Display: 3½-digit, 13mm high LCD-display

Housing: ABS-enclosure, front side IP65

Dimensions:       approx. 106 x 67 x 30 mm

Weight:     approx. 185g  

encapsulated PC board