Redpitaya RED PITAYA, OPEN SOURCE LAB RED Pitaya V 1.1 Data Sheet
Product codes
RED Pitaya V 1.1
19
Annotation
number
Description
6
AUTO button: Click this button to automatically select the optimal visualization
range for the currently applied signals.
range for the currently applied signals.
7
Trigger menu (click on the “Trigger” bar to expand the trigger menu, Figure 10):
Source: trigger source selection (channel1, channel2, external)
Mode: trigger mode
o Auto:
Continuously
acquires
sequences
of
samples
(asynchronously to the input signal).
o Normal: Acquires traces when trigger conditions are met (time
t=0 in the plot area represents the trigger event)
o Single: A single trace is acquired when “Single” button is clicked.
Edge: Selects the trigger edge (rising, falling).
Level: Selects the trigger level.
8
Range menu (Figure 10): Range and offset buttons enable quick diagram
visualization area setup.
visualization area setup.
9
Measure menu: It gathers voltage statistics and frequency/time characteristics of
both input signals.
both input signals.
10
Gain settings menu (Figure 10):
Probe attenuation: Should be set according to the probe being used.
Gain setting: Should be set according to the current jumper setting.
To exit the Oscilloscope application click the Red Pitaya logo on the top right of the screen.
4.2 Signal generator application
The signal generator functionality is available as an extension of the Oscilloscope application in
order to be able to use both of them simultaneously.
order to be able to use both of them simultaneously.