Atmel Xplained Evaluation Board ATXMEGAA3BU-XPLD ATXMEGAA3BU-XPLD Data Sheet

 

8324B-AVR-09/11 

Figure 4-2. Connecting AVR ONE! to a XMEGA-A3BU Xplained board. 

The grey female 10-pin header on JTAGICE mkII has to be used when connecting to 
the kit. The opening in the board is made to fit the orientation tab on the header. 

NOTE 

When using PDI with the JTAGICE mkII it is necessary to use the squid cable. Follow 
the instructions in the JTAGICE mkII manual and the silkscreen description for the 
programming header. 

Figure 4-3. Connecting AVR JTAGICE mkll to an XMEGA-A3BU Xplained board. 

In order to connect the AVR Dragon to the XMEGA-A3BU Xplained, a 10-pin header 
cable is needed. Connect the cable between the JTAG connector on the AVR 
Dragon™ kit and the XMEGA-A3BU Xplained JTAG connector. Pin 1 on the XMEGA-
A3BU Xplained kit is marked with a square pad.