Atmel Xplained Evaluation Board ATXMEGAA3BU-XPLD ATXMEGAA3BU-XPLD Data Sheet
Product codes
ATXMEGAA3BU-XPLD
Atmel AVR1923
5
8394B-AVR-02/12
by measuring the current that is flowing into this plane. The VCC_MCU_P3V3 plane
is connected via a jumper to the main power plane (VCC_P3V3) and by replacing the
jumper with an amperemeter it is possible to determine the current consumption. To
locate the power measurement header, please refer to
is connected via a jumper to the main power plane (VCC_P3V3) and by replacing the
jumper with an amperemeter it is possible to determine the current consumption. To
locate the power measurement header, please refer to
WARNING
Do not power the board without having the jumper or an amperemeter
mounted since this can cause latch-up of the Atmel AVR
ATxmega256A3BU due to current flow into the I/O pins.
mounted since this can cause latch-up of the Atmel AVR
ATxmega256A3BU due to current flow into the I/O pins.
3.4 Programming the kit
The kit can be programmed either from an external programming tool or through an
USB boot loader which is pre-programmed on the device.
USB boot loader which is pre-programmed on the device.
The boot loader is evoked by pushing the push button (SW0) during power-on, that is
push and hold the button and hence connect an USB cable to the kit. Programming
can be performed through the DFU programmer FLIP.
push and hold the button and hence connect an USB cable to the kit. Programming
can be performed through the DFU programmer FLIP.
How a programmer can be connected to the kit is described in Section
.