Atmel Evaluation Kit AT91SAM9260-EK AT91SAM9260-EK Data Sheet
Product codes
AT91SAM9260-EK
Setting Up the AT91SAM9260-EK Board
AT91SAM9260-EK Evaluation Board User Guide
2-3
6234C–ATARM–22-Mar-07
Figure 2-2. AT91SAM9260-EK Layout - Bottom View
2.4
Powering Up the
Board
Board
The AT91SAM9260-EK requires 5V DC (±5%). DC power is supplied to the board via
the 2.1 mm by 5.5 mm socket J1. Coaxial plug center positive standard.
the 2.1 mm by 5.5 mm socket J1. Coaxial plug center positive standard.
2.5
Backup Power
Supply
Supply
The user has the possibility to plug a battery (3V Lithium Battery CR1225 or equivalent)
in order to permanently power the backup part of the device. In this case, J10 configura-
tion must be set in position 1, 2.
in order to permanently power the backup part of the device. In this case, J10 configura-
tion must be set in position 1, 2.
Refer to
.
2.6
Getting Started
The AT91SAM9260-EK evaluation board is delivered with a CD-ROM containing all nec-
essary information and step-by-step procedures for working with the most common
development toolchains. Please refer to this CD-ROM, or to the AT91 web site,
essary information and step-by-step procedures for working with the most common
development toolchains. Please refer to this CD-ROM, or to the AT91 web site,
, for the most up-to-date information on getting
started with the AT91SAM9260-EK.