Atmel Evaluation Kit AT91SAM9X25-EK AT91SAM9X25-EK Data Sheet
Product codes
AT91SAM9X25-EK
408
SAM9X25 [DATASHEET]
11054E–ATARM–10-Mar-2014
29.12.2 Frozen Mode
When the external device asserts the NWAIT signal (active low), and after internal synchronization of this signal, the
SMC state is frozen, i.e., SMC internal counters are frozen, and all control signals remain unchanged. When the
resynchronized NWAIT signal is deasserted, the SMC completes the access, resuming the access from the point where
it was stopped. See
SMC state is frozen, i.e., SMC internal counters are frozen, and all control signals remain unchanged. When the
resynchronized NWAIT signal is deasserted, the SMC completes the access, resuming the access from the point where
it was stopped. See
. This mode must be selected when the external device uses the NWAIT signal to delay
the access and to freeze the SMC.
The assertion of the NWAIT signal outside the expected period is ignored as illustrated in
Figure 29-26.Write Access with NWAIT Assertion in Frozen Mode (EXNW_MODE = 10)
EXNW_MODE = 10 (Frozen)
WRITE_MODE = 1 (NWE_controlled)
WRITE_MODE = 1 (NWE_controlled)
NWE_PULSE = 5
NCS_WR_PULSE = 7
NCS_WR_PULSE = 7
A
[25:2]
MCK
NWE
NCS
4
3
2
1
1
1
0
1
4
5
6
3
2
2
2
2
1
0
Write cycle
D[31:0]
NWAIT
FROZEN STATE
NBS0, NBS1,
NBS2, NBS3,
A0,A1
NBS2, NBS3,
A0,A1
internally synchronized
NWAIT signal