Atmel Adaptor for ATSTK600 ATSTK600-TQFP100 ATSTK600-TQFP100 Data Sheet

The new AVRISP2 is  low-cost In-System Programmer for all AVR microcontrol-
lers with ISP interface. 

Features:

n

  Programs both Flash and EEPROM

n

  Supports fuses and lock bits programming

n

  Supports target voltages from 1.8V to 5.5V 

n

  Adjustable programming speed

n

  USB 2.0 compliant (full speed, 12 Mbps)

n

  Powered from USB, does not require external power supply

n

  Target interface protection

n

  Short–circuit protection

The Atmel ATSTK600 starter kit provides a complete programming and development 
system. It will support all AVR and AVR32 with fl ash memory (UC3 Family, ATtiny, 
ATmega and Xmega AVRs)

Features

n

  Sockets for all devices:

  10 versions of top and routing cards

n

  USB interface to host PC

n

  Supports all programming modes

n

  Separate Target Voltage Circuit

n

  Improved clock generator

Socket and adapter boards are available for the whole range of AVR’s, from 
8- to 144-pins devices. In the standard confi guration, the ATSTK600 is shipped 
with a demonstration board using an ATmega2560. To add support for the 
various devices, a package with the socket adapter card for the device to use 
must also be purchased. 

ATSTK600-DIP40   

: adapter board for PDIP devices 

ATSTK600-SOIC   

: adapter board for SOIC devices 

ATSTK600-TQFP100  

: adapter board for TQFP100 devices 

ATSTK600-TQFP64  

: adapter board for TQFP64 devices 

ATSTK600-TQFP64-2 

: adapter board for AT32UC3B in TQFP64 

ATSTK600-TQFP44  

: adapter board for TQFP44 devices 

ATSTK600-TQFP32  

: adapter board for TQF32 devices 

ATSTK600-TINYX3U 

: adapter board for ATtinyX3U devices 

ATSTK600-UC3-144 

: adapter board for AT32UC3A0 

ATSTK600-TINY10   

: adapter board for ATtiny10,9,5,4