Atmel Xplained Pro Evaluation Kit ATSAMD20-XPRO ATSAMD20-XPRO Data Sheet
Product codes
ATSAMD20-XPRO
567
Atmel | SMART SAM D20 [DATASHEET]
Atmel-42129K–SAM-D20_datasheet–06/2014
32.6
Power Consumption
The values in
are measured values of power consumption under the following conditions, except where
noted:
z
Operating conditions
z
V
VDDIN
= 3.3V
z
Wake up time from sleep mode is measured from the edge of the wakeup signal to the execution of the first
instruction fetched in flash.
instruction fetched in flash.
z
Oscillators
z
XOSC (crystal oscillator) stopped
z
XOSC32K (32kHz crystal oscillator) running with external 32kHz crystal
z
DFLL48M using XOSC32K as reference and running at 48MHz
z
Clocks
z
DFLL48M used as main clock source
z
CPU, AHB clocks undivided
z
APBA clock divided by 4
z
APBB and APBC bridges off
z
The following AHB module clocks are running: NVMCTRL, APBA bridge
z
All other AHB clocks stopped
z
The following peripheral clocks running: PM, SYSCTRL, RTC
z
All other peripheral clocks stopped
z
I/Os are inactive with internal pull-up
z
CPU is running on flash with 1 wait states
z
Low power cache enabled
z
BOD33 disabled