Atmel ARM-Based Evaluation Kit for SAM4S16C, 32-Bit ARM® Cortex® Microcontroller ATSAM4S-WPIR-RD ATSAM4S-WPIR-RD Data Sheet

Product codes
ATSAM4S-WPIR-RD
Page of 1231
SAM4S Series [DATASHEET]
Atmel-11100G-ATARM-SAM4S-Datasheet_27-May-14
334
Figure 18-7.
Using WKUP Pins Without RTCOUTx Pins
18.3.7.3 Clock Alarms
The RTC and the RTT alarms can generate a wake-up of the core power supply. This can be enabled by writing, 
respectively, the bits RTCEN and RTTEN to 1 in SUPC_WUMR.
The Supply Controller does not provide any status as the information is available in the user interface of either the 
Real-Time Timer or the Real-Time Clock.
18.3.7.4 Supply Monitor Detection
The supply monitor can generate a wake-up of the core power supply. Se
.
18.3.8 Register Write Protection
To prevent any single software error from corrupting SYSC behavior, certain registers in the address space can be 
write-protected by setting the WPEN bit in the 
(SYSC_WPMR).
The following registers can be write-protected:
RSTC Mode Register
RTT Mode Register
RTT Alarm Register
RTC Control Register
RTC Mode Register
RTC Time Alarm Register
RTC Calendar Alarm Register
General Purpose Backup Registers
MCU
WKUP0
WKUP1
VDDIO
Pull-up
Resistor
Pull-up
Resistor
GND
GND
GND