Atmel ARM-Based Evaluation Kit for SAM4S16C, 32-Bit ARM® Cortex® Microcontroller ATSAM4S-WPIR-RD ATSAM4S-WPIR-RD Data Sheet

SAM4S Series [DATASHEET]

Atmel-11100G-ATARM-SAM4S-Datasheet_27-May-14

38

The SAM4SD32 device (2x1024 Kbytes) embeds a total of 160 Kbytes of high-speed SRAM.
The SAM4SD16 device (2x512Kbytes)embeds a total of 160 Kbytes of high-speed SRAM.
The SAM4SA16 device (1024 Kbytes) embeds a total of 160 Kbytes of high-speed SRAM.
The SAM4S16 device (1024 Kbytes) embeds a total of 128 Kbytes of high-speed SRAM.
The SAM4S8 device (512 Kbytes) embeds a total of 128 Kbytes of high-speed SRAM.
The SAM4S4 device (128 Kbytes) embeds a total of 64 Kbytes of high-speed SRAM. 
The SAM4S2 device (64 Kbytes) embeds a total of 64 Kbytes of high-speed SRAM. 
The SRAM is accessible over system Cortex-M4 bus at address 0x2000 0000.
The SRAM is in the bit band region. The bit band alias region is from 0x2200 0000 to 0x23FF FFFF.

The SAM4S embeds an internal ROM, which contains the SAM boot assistant (SAM-BA

®

), in-application 

programming routines (IAP) and Fast Flash Programming Interface (FFPI).
At any time, the ROM is mapped at address 0x0080 0000.

The memory is organized in sectors. Each sector has a size of 64 Kbytes. The first sector of 64 Kbytes is divided 

into 3 smaller sectors. 
The three smaller sectors are organized to consist of 2 sectors of 8 Kbytes and 1 sector of 48 Kbytes. Refer to 

 below.