Atmel ARM-Based Evaluation Kit for SAM4S16C, 32-Bit ARM® Cortex® Microcontroller ATSAM4S-WPIR-RD ATSAM4S-WPIR-RD Data Sheet
Product codes
ATSAM4S-WPIR-RD
SAM4S Series [DATASHEET]
Atmel-11100G-ATARM-SAM4S-Datasheet_27-May-14
700
34.7
Functional Description
34.7.1 Transfer Format
The data put on the TWD line must be 8 bits long. Data is transferred MSB first; each byte must be followed by an
acknowledgement. The number of bytes per transfer is unlimited (see
).
A high-to-low transition on the TWD line while TWCK is high defines the START condition.
A low-to-high transition on the TWD line while TWCK is high defines a STOP condition.
Figure 34-3.
START and STOP Conditions
Figure 34-4.
Transfer Format
34.7.2 Modes of Operation
The TWI has different modes of operations:
Master transmitter mode
Master receiver mode
Multi-master transmitter mode
Multi-master receiver mode
Slave transmitter mode
Slave receiver mode
These modes are described in the following sections.
TWD
TWCK
Start
Stop
TWD
TWCK
Start
Address
R/W
Ack
Data
Ack
Data
Ack
Stop