Atmel ARM-Based Evaluation Kit for SAM4S16C, 32-Bit ARM® Cortex® Microcontroller ATSAM4S-WPIR-RD ATSAM4S-WPIR-RD Data Sheet
Product codes
ATSAM4S-WPIR-RD
SAM4S Series [DATASHEET]
Atmel-11100G-ATARM-SAM4S-Datasheet_27-May-14
844
Figure 37-15. Predefined Connection of the Quadrature Decoder with Timer Counters
37.6.14.2Input Pre-processing
Input pre-processing consists of capabilities to take into account rotary sensor factors such as polarities and phase
definition followed by configurable digital filtering.
Each input can be negated and swapping PHA, PHB is also configurable.
The MAXFILT field in the TC_BMR is used to configure a minimum duration for which the pulse is stated as valid.
Each input can be negated and swapping PHA, PHB is also configurable.
The MAXFILT field in the TC_BMR is used to configure a minimum duration for which the pulse is stated as valid.
When the filter is active, pulses with a duration lower than MAXFILT +1 * t
MCK
ns are not passed to down-stream
logic.
Filters can be disabled using the FILTER bit in the TC_BMR.
Filters can be disabled using the FILTER bit in the TC_BMR.
Timer/Counter
Channel 0
Channel 0
1
XC0
TIOA
TIOB
Timer/Counter
Channel 1
Channel 1
1
XC0
TIOB
QDEN
Timer/Counter
Channel 2
Channel 2
1
TIOB0
XC0
1
1
SPEEDEN
1
XC0
Quadrature
Decoder
(Filter + Edge
Detect + QD)
PHA
PHB
IDX
TIOA0
TIOB0
TIOB1
TIOB1
TIOA0
Index
Speed/Position
Rotation
Speed Time Base
Reset pulse
Direction
PHEdges
QDEN