Atmel ARM-Based Evaluation Kit for SAM4S16C, 32-Bit ARM® Cortex® Microcontroller ATSAM4S-WPIR-RD ATSAM4S-WPIR-RD Data Sheet
Product codes
ATSAM4S-WPIR-RD
979
SAM4S Series [DATASHEET]
Atmel-11100G-ATARM-SAM4S-Datasheet_27-May-14
39.7.23 PWM Fault Mode Register
Name:
PWM_FMR
Address:
0x4002005C
Access:
Read/Write
This register can only be written if bits WPSWS5 and WPHWS5 are cleared in the
.
• FPOL: Fault Polarity
For each field bit y (fault input number):
0: The fault y becomes active when the fault input y is at 0.
1: The fault y becomes active when the fault input y is at 1.
• FMOD: Fault Activation Mode
For each field bit y (fault input number):
0: The fault y is active until the Fault condition is removed at the peripheral
level.
1: The fault y stays active until the Fault condition is removed at the peripheral
level AND until it is cleared in the
.
Note:
1. The Peripheral generating the fault.
• FFIL: Fault Filtering
For each field bit y (fault input number):
0: The fault input y is not filtered.
1: The fault input y is filtered.
CAUTION:
, the bit FMODy
can be set to ‘1’ only if the FPOLy bit has been previously configured to its final value.
31
30
29
28
27
26
25
24
–
23
22
21
20
19
18
17
16
FFIL
15
14
13
12
11
10
9
8
FMOD
7
6
5
4
3
2
1
0
FPOL