Atmel Xplained Evaluation Board AT32UC3A3-XPLD AT32UC3A3-XPLD Data Sheet
Product codes
AT32UC3A3-XPLD
246
32072H–AVR32–10/2012
AT32UC3A3
17. Error Corrected Code Controller (ECCHRS)
Rev. 1.0.0.0
17.1
Features
•
Hardware Error Corrected Code Generation with two methods :
– Hamming code detection and correction by software (ECC-H)
– Reed-Solomon code detection by hardware, correction by hardware or software (ECC-RS)
•
Supports NAND Flash and SmartMedia
™
devices with 8- or 16-bit data path for ECC-H, and with
8-bit data path for ECC-RS
•
Supports NAND Flash and SmartMedia
™
with page sizes of 528, 1056, 2112, and 4224 bytes
(specified by software)
•
ECC_H supports :
– One bit correction per page of 512,1024,2048, or 4096 bytes
– One bit correction per sector of 512 bytes of data for a page size of 512, 1024, 2048, or 4096
bytes
– One bit correction per sector of 256 bytes of data for a page size of 512, 1024, 2048, or 4096
bytes
•
ECC_RS supports :
– 4 errors correction per sector of 512 bytes of data for a page size of 512, 1024, 2048, and
4096 bytes with 8-bit data path
17.2
Overview
NAND Flash and SmartMedia
™
devices contain by default invalid blocks which have one or
more invalid bits. Over the NAND Flash and SmartMedia
™
lifetime, additional invalid blocks may
occur which can be detected and corrected by an Error Corrected Code (ECC).
The ECC Controller is a mechanism that encodes data in a manner that makes possible the
identification and correction of certain errors in data. The ECC controller is capable of single-bit
error correction and two-bit random detection when using the Hamming code (ECC-H) and up to
four symbols (a symbol is a 8-bit data) correction whatever the number of errors in symbol (1 to
8 bits of error) when using the Reed-Solomon code (ECC-RS).
identification and correction of certain errors in data. The ECC controller is capable of single-bit
error correction and two-bit random detection when using the Hamming code (ECC-H) and up to
four symbols (a symbol is a 8-bit data) correction whatever the number of errors in symbol (1 to
8 bits of error) when using the Reed-Solomon code (ECC-RS).
When NAND Flash/SmartMedia
™
have more than two erroneous bits when using the Hamming
code (ECC-H) or more than four bits in error when using the Reed-Solomon code (ECC-RS), the
data cannot be corrected.
data cannot be corrected.