Atmel SAM4L Xplained Pro Starter Kit Atmel ATSAM4L-XSTK ATSAM4L-XSTK Data Sheet
Product codes
ATSAM4L-XSTK
869
42023E–SAM–07/2013
ATSAM4L8/L4/L2
31.8.17
Event Shaper Register
Name:
EVSj
Access Type: Read/Write
Offset: 0x200
+
j*0x004
Reset Value:
0x00000000
• IGFON: Input Glitch Filter Status
0: Input Glitch Filter is off.
1: Input Glitch Filter is on.
Only present when IGF is used. Refer to the Module Configuration section at the end of this chapter.
To enable Input Glitch Filtering, EN bit must be set to 1, as well as one of IGFF or IGFR.
This bit is Read-only, and can be used to detect that configuration is effective. It incurs some delay compared to the writing of
IGFF, IGFR, or EN.
• IGFF: Input Glitch Filter Fall
0: No event detection on falling edge.
1: Event detection through Input Glitch Fiilter on falling edge.
Only present when IGF is used. Refer to the Module Configuration section at the end of this chapter.
To enable Input Glitch Filtering, EN bit must also be set to 1.
Both IGFF and IGFR can be combined.
• IGFR: Input Glitch Filter Rise
0: No event detection on rising edge.
1: Event detection through Input Glitch Fiilter on rising edge.
Only present when IGF is used. Refer to the Module Configuration section at the end of this chapter.
To enable Input Glitch Filtering, EN bit must also be set to 1.
Both IGFF and IGFR can be combined.
• EN: Event Shaper Enable
0: Event Shaper is off.
1: Event Shaper is on.
To enable Input Glitch Filtering, IGFR and/or IGFF must also be set to 1.
31
30
29
28
27
26
25
24
-
-
-
-
-
-
-
-
23
22
21
20
19
18
17
16
-
-
-
-
-
IGFON
IGFF
IGFR
15
14
13
12
11
10
9
8
-
-
-
-
-
-
-
-
7
6
5
4
3
2
1
0
-
-
-
-
-
-
-
EN