Atmel Xplained Pro Evaluation Kit for the ATSAMD21J18A Microcontroller ATSAMD21-XPRO ATSAMD21-XPRO Data Sheet
Product codes
ATSAMD21-XPRO
625
Atmel | SMART SAM D21 [DATASHEET]
Atmel-42181C–SAM-D21_Datasheet–07/2014
29.8.6 Debug Control
Name:
DBGCTRL
Offset:
0x08
Reset:
0x00
Property:
Write-Protected
z
Bits 7:1 – Reserved
These bits are unused and reserved for future use. For compatibility with future devices, always write these bits to
zero when this register is written. These bits will always return zero when read.
These bits are unused and reserved for future use. For compatibility with future devices, always write these bits to
zero when this register is written. These bits will always return zero when read.
z
Bit 0 – DBGRUN: Debug Run Mode
This bit is not affected by a software reset, and should not be changed by software while the TC is enabled.
0: The TC is halted when the device is halted in debug mode.
1: The TC continues normal operation when the device is halted in debug mode.
This bit is not affected by a software reset, and should not be changed by software while the TC is enabled.
0: The TC is halted when the device is halted in debug mode.
1: The TC continues normal operation when the device is halted in debug mode.
Bit
7
6
5
4
3
2
1
0
DBGRUN
Access
R
R
R
R
R
R
R
R/W
Reset
0
0
0
0
0
0
0
0