Atmel Xplained Pro Evaluation Kit for the ATSAMD21J18A Microcontroller ATSAMD21-XPRO ATSAMD21-XPRO Data Sheet
Product codes
ATSAMD21-XPRO
855
Atmel | SMART SAM D21 [DATASHEET]
Atmel-42181C–SAM-D21_Datasheet–07/2014
32.8.7 Software Trigger
Name:
SWTRIG
Offset:
0x0C
Reset:
0x00
Property:
Write-Protected, Write-Synchronized
z
Bits 7:2 – Reserved
These bits are unused and reserved for future use. For compatibility with future devices, always write these bits to
zero when this register is written. These bits will always return zero when read.
These bits are unused and reserved for future use. For compatibility with future devices, always write these bits to
zero when this register is written. These bits will always return zero when read.
z
Bit 1 – START: ADC Start Conversion
0: The ADC will not start a conversion.
1: The ADC will start a conversion. The bit is cleared by hardware when the conversion has started. Setting this bit
when it is already set has no effect.
Writing this bit to zero will have no effect.
0: The ADC will not start a conversion.
1: The ADC will start a conversion. The bit is cleared by hardware when the conversion has started. Setting this bit
when it is already set has no effect.
Writing this bit to zero will have no effect.
z
Bit 0 – FLUSH: ADC Conversion Flush
0: No flush action.
1: The ADC pipeline will be flushed. A flush will restart the ADC clock on the next peripheral clock edge, and all
conversions in progress will be aborted and lost. This bit is cleared until the ADC has been flushed.
After the flush, the ADC will resume where it left off; i.e., if a conversion was pending, the ADC will start a new
conversion.
Writing this bit to zero will have no effect.
0: No flush action.
1: The ADC pipeline will be flushed. A flush will restart the ADC clock on the next peripheral clock edge, and all
conversions in progress will be aborted and lost. This bit is cleared until the ADC has been flushed.
After the flush, the ADC will resume where it left off; i.e., if a conversion was pending, the ADC will start a new
conversion.
Writing this bit to zero will have no effect.
Bit
7
6
5
4
3
2
1
0
START
FLUSH
Access
R
R
R
R
R
R
R/W
R/W
Reset
0
0
0
0
0
0
0
0